Sony KDS-70Q006 Service Manual page 241

Contacting Sony
Troubleshooting
Twin View
Problem
I cannot get Twin View to work
There is no Twin View window,
or it is just static
Twin View cannot display
anything but TV channels
Twin View displays the same
program in both windows
If, after reading these operating instructions, you have additional questions
related to the use of your Sony television, please call our QUALIA Call
Center at 1-877-782-5423 (US residents only) or Customer Relations Center
at 1-877-899-SONY (7669) (Canadian residents only).
Before calling Sony customer support, please write down the model and
serial numbers of your TV. You'll find this information on the front cover of
this manual.
Possible Remedies
❏
If you are using a cable box to unscramble all channels (as shown on page 38),
you cannot use the Twin View feature. This is because the cable box can
unscramble only one channel at a time.
❏
You can use Twin View to view a signal from a different source that is connected
to the SXRD projection TV's A/V jacks (such as a VCR or DVD player) in the
second window by pressing
❏
Sources connected to the CABLE, VIDEO 4, VIDEO 5, VIDEO 6 and VIDEO 7
inputs, as well as digital source display only in the left Twin View window.
❏
Be sure the Twin View window is set to a video input or channel that has a signal
airing.
❏
You might be tuned to a video input with nothing connected to it. Try cycling
through the video inputs by pressing TV/VIDEO.
❏
Try cycling through the video inputs by pressing TV/VIDEO. Check that the
Label Video Inputs option is not set to Skip. (See the Setup menu on page 123.)
❏
Both Twin View windows might be set to the same channel. Try changing
channels in either window.
TV/VIDEO
while in Twin View.
Other Information
129