Position The Base Plates Front Printer; Base Plates For Bottom Printer - Epson D-Jet 500 Installation Manual

Frame Assembly
5
Printer Base Plates
5.5.4

Position the Base Plates Front Printer

Position the base plates that the distance between
the profile edge and the printer support plate is
approx. 12 mm.
Tighten all screws from the support plate and tight
the screws from the chapter before.
5.5.5

Base Plates for Bottom Printer

Do the same for the bottom printer but mount the base plates the other way around.
5-16
DJet 300-500-700 – HW Installation Manual
approx 12 mm