Safety Instructions For your protection • Read the operating instructions in full before starting up and follow the safety instructions. • Keep the operating instructions in a place where they can be accessed by everyone. • Ensure that only trained staff work with the appliance. •...
Page 4
- The appliance is not running smoothly - The container moves on the base plate • Beware of hazards due to: - Flammable materials - Combustible media with a low boiling temperature - Incorrect container size - Overfilling of media - Unsafe condition of container.
periodical system at temperatures above 300-400°C . Only elementary fluorine, chlorine trifluoride and alkaline metals do attack PTFE, halogen hydrocarbons have a reversible swelling effect. To the protection of the equipment Caution: Equipment may not be poured over with aggressive media! Equipment never under water set! •...
Operator’s Control OLED KEY KEY KEY : Run/Stop : 1) It works as the shift key to change the position of the cursor before the unit is running 2) It works as the shift key to switch between the Non-reverse mode and Reverse mode when the unit is running.
Installation • Connect the appliance to a socket (the voltages stated on the nameplates must correspond to the mains voltage). • OLED is light and records the speed and time data of last running • Set the timing operation and continuous operation before running.
• Do not allow moisture to get into the appliance when cleaning. • Wear protective gloves during cleaning the devices Before using another than recommended method for cleaning or decontamination, the user must ascertain with us that this method does not destroy the instrument.
Need help?
Do you have a question about the KING KONG MI0102001D and is the answer not in the manual?
Questions and answers