Furuno WR2120 Operator's Manual page 56

3) Trouble shooting
If copy or FTP transfer process is not working properly, please check whether two batch files of AUTO.bat
and AUTO_FTP.bat are running (Generally two command prompts are running. Only one command
prompt will run if FTP is not transferred). It needs to check the contents of the operation if it is no copying or
FTP transferring even though two command prompts are in operation. However, since contents of
processing are not shown at the command prompt at present, it would not know which processing is not
working properly. Make the following changes to indicate the processing contents at the command prompt
to investigate the failure, and correct the setting.
Before change: @echo off
After change: @rem @echo off
Figure 4.12: Sample of AUTO_FTP.bat (Before -> After)
S2E-17-0208_OM_WR2120_C
47