Furuno WR2120 Operator's Manual page 52

2. Contents of AUTO.bat
Auto.bat compresses the file and will copy into the designated folder when recorded data of the
observation data is saved.
2-1) AUTO.bat operation environment setting (no need to change)
It specified the folder that stores AUTO.bat, therefore do not change this setting item.
SET DIR = C: ＼ Users ＼ radar ＼ FURUNO ＼ WR_transfer
2-2) Designation of observation data recording folder
Specify the folder to records the observed data. Generally it will record the binary data of
RainMap into the destination folder.
e.g.) If specifying the multi folder under the D drive, then
CHK_DIR = D: ＼ multi
2-3) Specify a batch file working folder
Create / delete files while batch file is processing. Specify the working folder.
e.g.) If the WR_transfer folder of the D drive is specified as the working folder, then
WRK_DIR = D: ＼ WR_transfer
2-4) Designation of observation data storage folder
Specify the destination to save the recorded file that compressed observation data. Create
and save a folder with recorded date in the designated folder.
e.g.) If the WR2120 _ INT folder under the D drive is specified as the save folder, then
SAV_DIR = D: ＼ WR2120 _ INT
3. Set the AUTO_FTP
Auto_FTP.bat compresses and copies file to the specified folder when the recorded data of the
observation data is saved. When performing FTP transfer, it is necessary to set the information of
the FTP transfer destination in AUTO_FTP.bat (required).
Figure 4.4: Sample of Auto.bat
Figure 4.5: Sample of Auto_FTP
43
S2E-17-0208_OM_WR2120_C