Furuno WR2120 Operator's Manual page 18

Weather radar
Hide thumbs Also See for WR2120:
Table of Contents

Advertisement

Binary data:
Turn ON or OFF to record in binary data format.
(Refer section 5.2 or 5.3. for detail of binary file
format)
Binary save path:
Setup a folder to save the binary data.
Radar parameters in Binary file:
Select type of parameter(s),
R [mm/h], Zh [dBZ], V [m/s], Zdr[dB], Kdp[deg/km], φ dp[deg], ρhv, W [m/s], Quality
Binary file version:
Select type of file format version,
v3 (legacy format),
v10,
3. Radar Site Location
Latitude [deg]:
Enter latitude of radar installed location.
Longitude [deg]:
Enter longitude of radar installed location.
Altitude [m]:
Enter the altitude of radar installed location.
Map data path:
Setup a background map for RainMap.
The RainMap program displays map as a
cylindrical projection layer.
Map left top lat [deg]:
Setup the latitude of left top corner of Map Image.
4. Scan
There are 5 scan patterns that can be customize and
saved in settings.
Note:
This item is possible to change the setting even when the
radar is observing.
However it is necessary to click [STBY] and [TX] again for
reflecting the changes in the scan setting while observing.
Scan mode:
Select the scan mode of antenna.
Volume scan modes. It is recommended that an
azimuth direction rotation speed of less than 7.0
[rpm] to maintain observation accuracy.
PPI scan [2D data]
[Plan Position Indicator scan]
Maintains a continuous equiangular 360 degree horizontal rotation at a single selectable elevation. It is
used to
observe one set elevation continuously in a 360 degree radius.
Example of Setting:
To observe a 3.5 [deg] elevation angle at a
rotational speed of 7.0 [rpm] in a 360 degree
azimuth radius set as shown in Table 2.2 .
Sector RHI scan [3D data] (Refer to Figure 2.6)
[Sector Range Height Indicator scan]
Map left top lon [deg]:
Setup the longitude of left top corner of
Map Image.
Map right bottom lat [deg]:
Setup the latitude of bottom right corner of
"Map Image".
Map right bottom lon [deg]:
Setup the longitude of bottom right corner
of "Map Image".
For PPI and
PPI scan
Sector RHI scan
Volume Scan
Sector PPI scan
9
S2E-17-0208_OM_WR2120_C
Table 2.1
Scan mode
scn or ppix
scn or scnx
sppi or sppix
Table 2.2
Key
EL angle [deg]
AZ rotation speed [rpm]
Extension
rhi or rhix
Value
3.5
7.0

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

9zwwr2120

Table of Contents