JDS Uniphase OTU-8000 (EOTU8000E) User Manual page 58

Chapter 3 Installation of the OTU-8000
Configuring the OTU-8000
44
Click on the button A
PPLY
registered configuration with the detected one.
Once the detection is completed, the page is displayed as follows:
Fig. 57 Switch configuration valid (example with one OSX8000
configured as distributor)
NOTE
If the page displays a registered configuration but no detected hard-
ware, you must apply the modifications (this is the case if you remove
the switch).
User Manual 7OTU80050/01
D S then
ETECTED WITCH
OK to match the
OSX used as
distributor