Section 4: Maintenance and Lubrication
Lubrication
Lubrication
Legend
20
RTR2570 Rotary Tillers 311-251M
Table of Contents
Multi-purpose
Multi-purpose
spray lube
22230
22229
14759
Multi-purpose
grease lube
oil lube
Driveline U-Joint
Coat PTO u-joint with grease every 8 hours of operation.
Type of grease = Multi-Purpose
Quantity = Coat Generously
Driveline Shaft
Disconnect PTO shaft from the tractor and slide apart. Clean
and coat the inner tube of the PTO shaft with a light film of
grease and then reassemble.
Type of grease = Multi-Purpose
Quantity = Coat Generously
Bearing on Left End of Rotor Shaft
Grease bearing on right end of tines until grease starts to
purge from the relief hole in the bearing mount casting on the
inside of the tiller end plate.
Type of grease = Multi-Purpose
Quantity = Coat Generously
Land Pride
20
Intervals in hours at which
lubrication is required.
8
Hrs
20
Hrs
8
Hrs
2/16/09