Land Pride RTA10 Series Features And Benefits

Rotary Tillers,
Standard Tine Rotation
Features and Benefits
Rotary Tillers, Standard Tine Rotation
Features
American made
Tractor HP range
Gearbox Warranty
Working widths
6 1/2" Digging depth
Plate steel upper hitch
Clevis hitch
Hitch offset capability
Offset Dimensions
Fits Land Pride Quick-Hitch
Adjustable Parking stand
Adjustable Skid Shoes
Formed and reinforced rear
deflector
4 'C' shaped tines per flange
Solid rotor shaft
15" Rotor swing diameter
Double lip seal on rotor bearing
Fully shielded shear pin or slip-
clutch driveline
#80 Drive chain enclosed in oil
bath
Stamped chain cover
Designs, specifications, features and information are subject to change without notice.
6/23/10
RTA10 Series
Many tillers are imported. American made means better parts availability.
17-25 HP
5 Years on housing, gears, seals, and bearings. shows our confidence in the product.
42", 50", 58" to meet a wide range of abdications and needs.
For deep soil penetration.
Plate steel is stronger than flat bar type hitch
Provides additional strength and easy one person hook-up.
Offset by moving lower hitch points and gearbox mount to cover right tire track.
42" Width 16" - 26" Std.
50" Width 25" - 25" Std.
58" Width 29" - 29" Std.
Allows for quick and easy one person hook-up. Does not offset with Quick-Hitch.
Easy hook-up and storage.
Control depth with seven adjustments.
Keeps dirt in and leaves a level finish. Forming gives deflector additional strength.
Adjustable deflector allows for various finish results.
'C' Shaped tines require less HP to move through the ground.
1 3/4" Solid steel rotor shaft for strength.
For deep tilling and turning the soil over faster.
Double lip seal helps keep the dirt out and the grease in.
Protects gearbox and rotor shaft upon hitting obstructions. Slip-clutch saves having
to replace shear-pins.
Heavy drive chain stretches less, and oil bath keeps wear to a minimum.
Stamped forming gives the chain cover strength.
Benefits
13" - 29" Max. Right 23" - 19" Max. Left
18" - 32" Max. Right 32" - 18" Max. Left
22" - 36" Max. Right 36" - 22" Max. Left
311-252F continued on next page
78