Section 1: Assembly and Set-up
Section 1: Assembly and Set-up
Tractor Requirements
This tiller is designed with a 3-point category I hitch.
Horsepower rating of tractor should not exceed 45 PTO
horsepower on all 25 series tillers.
NOTE: In order to maintain steering control, ballast
may have to be added to your tractor. To determine
whether or not to add ballast, refer to your tractor
operator's manual.
22237
8
RTR2570 Rotary Tillers 311-251M
Table of Contents
!
CAUTION
Do not over speed PTO or machine damage may result. This
reverse rotation tiller is designed to be used with a tractor
using a 540 RPM rear PTO.
Torque Requirements
Refer to "Torque Values Chart" on page 25 to determine
the correct torque value when tightening hardware
during assembly.
Hitch Assembly
Figure 1-1
Land Pride
2/16/09