Pilz PSS Series Operating Manual page 35

Technical Details
Input delay
Pulse suppression
Status display
Environmental data
Protection type (EN 60 529, 10/91)
Mounting position
Ambient temperature
(DIN IEC 68-2-14, 06/87)
Storage temperature
(EN 60 068-2-1/-2, 03/93)
Climatic suitability
(DIN IEC 68-2-30, 09/86)
Condensation
Vibration (EN 60 068-2-6, 04/95)
Shock (DIN IEC 68-2-29)
EMC
Mechanical data
Torque setting for the screws
Weight
The names of products, goods and technologies used in this manual are trademarks of the respective companies.
7-2
1 ms
≤ 300 µs (requirement: in the PSS Configurator,
≥ 3 ms must be configured under "Max. delay
of digital inputs" and "DI test time")
One LED per input
IP20 (installed in module rack)
Vertical in module rack
0 ... 60 °C
-25 ... +70 °C
Max. 95 % r.h.
Not permitted
Frequency range: 10 ... 100 Hz
Amplitude: 0.1 mm, max. 5g
30g, 11 ms/10g, 16 ms
EN 50 082-2, 03/95
EN 55 011-A, 08/96
0.5 ... 0.6 Nm
PSS DI2O Z: 1380 g
PSS1 DI2O Z: 590 g
Operating Manual: PSS(1) DI2O Z