G - Centrifugal Separator - Chicago Pneumatic CPVS 40 Instruction Manual

G - Centrifugal separator (See B Section 3)
Fig. 13
1 - Description
This device allows bleeding of the condensates formed in the air
cooler.
2 - Description of the option
The cooling of the compressed air allows the suction air to be
dried, thus removing the humidity that collects in the bottom of
the separator after being condensed in the aftercooler. The
condensates are evacuated from the separator through a trap with
a solenoid drip valve or a trap with level detector if this option is
installed.
Chicago Pneumatic Compressors
62 305 258 65
01/2008
Page 15