Daily Cleaning Instructions; Stainless Steel Cleaning - Welbilt Merco CrispyMax MCG1027NNN Installation, Operation And Maintenance Manual

Maintenance

DAILY CLEANING INSTRUCTIONS

1. Upon completion of the last holding cycle of
the day, allow the unit to cool approximately 30
minutes.
2. Disconnected from power source.
3. Remove divider(s) if present.
4. Remove food tray.
5. Remove crumb tray.
6. Wash components with soapy water.
7. Use a soft cloth or sponge, dampened with warm
soapy water, to wash the interior and exterior of
the appliance.
NOTE: Do not flood the appliance with cleaning
fluid!
4-2
8. Airflow openings should be inspected and any
blockage should be removed.
9. Rinse using a cloth dampened with clear water,
then dry.
10. Reinstall crumb tray, food tray and divider(s).
11. Ensure the food tray is inserted correctly. The
front edge should be flush with the cabinet.
Correct placement of the food tray.
Incorrect placement of the food tray. Front edge is too
high.
Incorrect placement of the food tray. Food tray is
rotated 180˚.

STAINLESS STEEL CLEANING

Stainless steel requires nothing more than a daily
wiping with a damp cloth. If, however, an excessive
amount of food particles/grease are allowed to
collect, a non-abrasive cleaner (hot sudsy water) may
be used. Merco recommends Merco Degreaser to
help remove stubborn, sticky, greasy buildup. Wipe
dry with a clean, soft cloth.
Always rub with the "grain" of the stainless steel to
Section 4