References - Aastra SIP-DECT Installation And Administration Manual

Installation, Administration and Maintenance
Handover
IPEI
PARK
Roaming
1.3

References

/1/ RFC 1350, The TFTP Protocol, Revision 2, July 1992
/2/ RFC 1889, RTP: A Transport Protocol for Real-Time Applications,
January 1996
/3/ RFC 2030, Simple Network Time Protocol (SNTP) Version 4 for IPv4,
IPv6 and OSI, October 1996
/4/ RFC 2131, Dynamic Host Configuration Protocol, March 1997
/5/ RFC 2327, SDP: Session Description Protocol, April 1998
/6/ RFC 2474, Definition of the Differentiated Service Field (DS Field) in the
IPv4 and IPv6 Headers, December 1998
/7/ RFC 2617, HTTP Authentication: Basic and Digest Access
Authentication, June 1999
/8/ RFC 3164, The BSD Sys Log Protocol, August 2001
Aastra Telecom
Handover
A handover is similar to roaming, but occurs during an
ongoing call. A handover normally takes place "in the
background", without disrupting the call (seamless
handover).
International Portable Equipment Identity
• 13-digit identification code for PPs
• Example: 00019 0592015 3
(the final digit is the checksum).
• The code is represented in decimal form.
• This code is globally unique.
Portable Access Rights Key
Access code for the Portable Part. This code determines
whether a PP can access a particular DECT system. Used
for unique selection of the system at handset
enrolment/subscription time. Provided with the Aastra
OMM Activation Kit and unique to each SIP-DECT
deployment.
Roaming
While in motion, the PP performs ongoing measurements
to determine which RFP is best received. The one that can
be best received is defined as the active RFP. To prevent
the PP from rapidly switching back and forth between two
RFPs that have similar signal strength, certain threshold
values are in effect.
Page: 6 (47)