Aastra SIP-DECT Installation And Administration Manual page 39

Installation, Administration and Maintenance
Subscribing Portable Parts to the SIP-DECT system
After adding a PP configuration to the OMM the PP must be subscribed. The
OMM must first be enabled to allow subscriptions to be take place from PP
handsets. This is done by pressing the "Subscribe" button on the Portable
Parts OMM webpage. The OMM will allow a subscription of configured but
not subscribed PPs during the next hour only. The administrator must press
the Subscribe button again to permit more PP handsets to subscribe to the
SIP-DECT system.
After the PP configuration is complete on the OMM and the OMM is allowing
new subscriptions, each PP must subscribe to the system.
On each PP handset, the administrator or user must subscribe to the SIP-
DECT system through the System/Subscriptions menu. The specific PARK
code for the SIP-DECT system must be entered in order to subscribe to the
system.
IMPORTANT: the PARK code in numeric format can be found at the top-right
corner of the Portable Parts OMM web page. Each SIP-DECT deployment
will have a unique PARK code that was provided with the OMM Activation kit.
If the administrator configured a global or individual Portable Part DECT
authentication code, the administrator/user must enter in the code before the
PP will subscribe to the system.
If administrators/users have any difficulties subscribing to the SIP-DECT
system, it is recommended that they power-off the PP handset and reattempt
subscription again.
This completes the subscription process for a PP on the SIP-DECT system.
Editing Portable Parts in the SIP-DECT system
A popup window appears when configuring an existing PP by pressing the
tool icon
editing PP units is the delete subscription checkbox. If this option is selected,
the PP will be unsubscribed.
Deleting Portable Parts in the SIP-DECT system
Deleting of a PP can be done by pressing the trash can icon . A popup
window appears and asks for confirmation.
Searching for Portable Parts in the SIP-DECT system
If the user wants to find a certain handset then the search function can be
used. A click on the "Search" button provides the following pop-up window.
Aastra Telecom
. The only difference between the popup window for adding and
Page: 39 (47)