Invacare HomeFill II IOH200AW User Manual page 23

WARNING!
– NEVER use tools of any kind to
connect/disconnect the cylinder and the
compressor. Otherwise, severe injury and/or
damage may occur.
1. Press the compressor power switch A to the Off (O)
position.
2. Grasp the cylinder B in the area behind the cylinder
fillport C.
3. With the other hand, grasp the outer ring (sleeve) of
the connector fillport E and push DOWN F.
4. Lift up on the cylinder to remove from the connector
fillport.
1195662-C
5. When the cylinder fillport is disconnected from the
connector fillport, release the outer ring (sleeve) of the
connector fillport and use two hands to remove the
cylinder from the compressor cradle.
WARNING!
– The fillport cover on the connector fillport
and the cylinder fillport MUST be replaced
after filling and whenever not in use. If
either of the fillport covers are missing
contact your healthcare provider before
using.
Usage
23