Usb Board - HP 240 G8 Maintenance And Service Manual

1. Prepare the computer for disassembly
2. Remove the rubber feet (see
3. Remove the bottom cover (see
4. Remove the battery (see
5. Remove the touchpad click board (see
To remove the touchpad click board:
▲ Lift the touchpad to remove it from the computer.
Reverse this procedure to install the touchpad.

USB board

To remove the USB board, use this procedure and illustration.
Table 5-13 USB board and cable descriptions and part numbers
Description
USB board
USB board cable
Before removing the USB board, follow these steps:
1. Prepare the computer for disassembly
2. Remove the rubber feet (see
3. Remove the bottom cover (see
4. Remove the battery (see
To remove the USB board:
1. Disconnect the cable from the USB board (1).
2. Remove the two Phillips M2.0 × 3.0 screws (2) that secure the USB board to the computer.
40 Chapter 5 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
Computer feet on page
Bottom cover on page
Battery on page 28).
Touchpad click board on page
(Preparation for disassembly on page
Computer feet on page
Bottom cover on page
Battery on page 28).
26).
26).
27).
38).
26).
26).
27).
Spare part number
L24483-001
L23186-001