Table of Contents
Advertisement
12.
To remove the display/webcam cable, lift the tape from the connector on the webcam module (1), and
then disconnect the cable from the webcam module (2). Lift the cable from the display enclosure to
disengage the adhesive that secures it (3).
13.
To remove the wireless antennas and cables, release the wireless antenna cables from the clips (1) built
into the side of the display enclosure, and then peel the antennas of the display enclosure (2) to remove
the antennas and cables.
NOTE:
14.
If replacing the display enclosure, be sure that the subcomponents (including the webcam/microphone
module, the antenna receivers, and all associated cables and hardware) are transferred to the new
enclosure.
54
Chapter 5 Removal and replacement procedures for authorized service provider parts
Number of antennas and transceivers can vary.
Hide quick links:
Advertisement
Table of Contents
