Table of Contents
Advertisement
21 October 2011
toggle switch should flash.
8. Reset the valve and reset the mode
position switch to position #1
You are now complete and the unit should function correctly. This test cycle should be
completed once a year.
Manual Mode (User Configured RPM)
Setup
With the control unit, the user/installer has the ability to set their own activation
RPM. It is necessary that you chose a low activation RPM first to test the units is
operating correctly.
activation.
Note: When you press the Set button the module will add 25% to the set speed.
1. Open
electronic
releasing the two locking tabs on the
side of the unit.
2. Adjust the position switch to Position
#3.
US Shipping Address: 88-446 Harrison St, Sumas, WA 98295 US Mailing Address: PO Box 231, Sumas, WA 98295
Ford 6.7L 2011-2012 Positive Air Shutoff
Once it has, you will need to set the high limit RPM
enclosure,
by
1
2
3
BD ENGINE BRAKE, INC.
Plant Address: A10-33733 King Rd, Abbotsford, BC, Canada V2S 7M9
Phone: 604-853-6096 Fax: 604-853-8749 Internet: www.bd-power.com
board, it should flash proportionally to the
engine RPM.
35
Advertisement
Table of Contents
