Table of Contents
Advertisement
21 October 2011
6. With the sticker in place use a
center punch and then use a
Ø1/8" drill bit and drill a hole in
the center of the holes marked
"For 3Ø".
There will be two holes and
they should be perfectly 180°
inline with each other through
the pipe.
DO
NOT
COMPLETELY
THE PIPE AND OUT THE
OTHER END.
NEED TO DRILL ONE SIDE
THEN ROTATE, AND THEN
DRILL THE OTHER SIDE.
7. Once the pilot holes are drilled
you will need to drill an
Ø11/32" hole through the pilot
holes.
You can now remove the
sticker.
You must deburr the inside
of the drilled holes.
US Shipping Address: 88-446 Harrison St, Sumas, WA 98295 US Mailing Address: PO Box 231, Sumas, WA 98295
Ford 6.7L 2011-2012 Positive Air Shutoff
DRILL
THROUGH
YOU WILL
BD ENGINE BRAKE, INC.
Plant Address: A10-33733 King Rd, Abbotsford, BC, Canada V2S 7M9
Phone: 604-853-6096 Fax: 604-853-8749 Internet: www.bd-power.com
Drill two 1/8" holes;
they should be 180°
apart in line.
Now drill the pilot
holes using 11/32
drill bit.
21
Advertisement
Table of Contents
