Table of Contents
Advertisement
21 October 2011
SETUP, TESTING AND VERIFICATION with OVER SPEED ELECTRONICS
Each unit is specifically configured for each model of
truck. As in the case of different model years and
makes the engine RPM frequency is different.
2011-2012 Ford Powerstroke
PAS Switch Position #1 (Automatic Mode)
PAS Switch Position #2 (Test Mode)
PAS Switch Position #3 (Manual Mode)
Automatic Mode (Pre Configured RPM)
1. Turn the ignition key to the on position.
You should see the RED light illuminate
on the toggle switch.
2. Next, start the engine.
3. With the engine idling, activate the
toggle switch.
You should hear the solenoid activate
and the valve close.
The engine should die.
Once the engine dies the switch should
flicker ON and OFF indicating a trip
condition.
4. You can now reset the valve, by rotating
the upper lever and engaging the
solenoid stop.
US Shipping Address: 88-446 Harrison St, Sumas, WA 98295 US Mailing Address: PO Box 231, Sumas, WA 98295
Ford 6.7L 2011-2012 Positive Air Shutoff
Action
Plant Address: A10-33733 King Rd, Abbotsford, BC, Canada V2S 7M9
Phone: 604-853-6096 Fax: 604-853-8749 Internet: www.bd-power.com
Activation RPM
5060
1320
User Configured
If the LED does not illuminate, check
the wiring to the back of the switch first.
Then check entire circuit.
If the engine does not die, check to
make sure the valve actuated.
If the valve did not actuate check switch
and ground wiring.
If valve did actuate but the engine is still
running, ensure nothing has contacted
the valve mechanism
BD ENGINE BRAKE, INC.
Engine Idle Speed Frequency
2011-2012 Ford 6.7L
600-800 Hz
(1.1:1) ratio
Activation Freq. (Hz)
4600
1200
User Configured
Failure/Fix/Notes
33
Advertisement
Table of Contents
