ATEN Master View CS-1754 User Manual page 40

w F4 ADM:
F4 is an Administrator only function. It allows the Administrator to
configure and control the overall operation of the OSD. To change a
setting Double Click it; or use the Up and Down Arrow Keys to move
the highlight bar to it then press [Enter].
After you select an item, a submenu with further choices for you to
select from appears. Double Click the choice you want, or move the
Highlight Bar to it then press [Enter]. An icon appears before the
selected choice so that you know which one it is. The settings are
explained in the following table:
Setting
SET
USERNAME
AND
PASSWORD
SET LOGOUT
TIMEOUT
(Table continues on next page)
34
This function is used to set Usernames and Passwords for the
Administrator and Users:
1. Usernames and Passwords for one Administrator and four
Users can be set.
2. After you select one of the User fields or the Administrator field,
a screen that allows you to key in a Username and Password
appears. The password may be up to 15 characters long, and
can consist of any combination of letters and numbers
(A - Z, 0 - 9).
3. For each individual, key in the Username and Password, then
press [Enter].
4. To modify or delete a previous Username and/or Password,
use the backspace key to erase individual letters or numbers.
If there is no input from the console for the amount of time set
with this function, the Operator is automatically logged out. A
login is necessary before the console can be used again. This
enables other Operators to gain access to the computers when
the original Operator is no longer accessing them, but has
forgotten to log out. To set the timeout value, key in a number
from 1 - 180 minutes, then press [Enter]. If the number is 0
[zero], this function is disabled. Default is 0.
Function
CS-1754 / CS-1758 User Manual