ATEN Master View CS-1754 User Manual page 27

w Auto Scan Mode
The CS-1754 / CS-1758's Auto Scan feature automatically switches
among all the active CPU Ports that are accessible to the currently
logged on User at regular intervals (see Scan Mode of the OSD F3
SET function, p. 33), so that he can monitor their activity
automatically.
To start Auto Scanning, key in the following Hotkey combination:
Invoke HKM (see p. 19)
1.
Key in [A]
2.
After you press A, you automatically exit Hotkey Mode, and enter
Auto Scan Mode.
To exit Auto Scan Mode, press [Esc] or [Spacebar]
Note: While Auto Scan Mode is in effect, ordinary keyboard and
mouse functions are suspended - only Auto Scan Mode
compliant keystrokes and mouse clicks can be input. You
must exit Auto Scan Mode in order to regain normal control
of the console.
While you are in Auto Scan Mode, you can pause the scanning in
order to keep the focus on a particular computer by pressing P.
During the time that Auto Scanning is paused, the Command Line
displays: Auto Scan: Paused.
Pausing when you want to keep the focus on a particular computer
is more convenient than Exiting Auto Scan Mode because when
you Resume scanning, you start from where you left off. If, on the
other hand, you Exited and restarted, Scanning would start over
from the very first computer on the installation.
After pausing, to resume Auto Scanning, press any key. Scanning
continues from where it left off.
CS-1754 / CS-1758 User Manual 21