ATEN Master View CS-1754 User Manual page 13

1. Firmware Upgrade Section
w
Firmware Upgrade Switch
During normal operation and while performing a fimware upgrade,
this switch should be in the NORMAL position. See p. 45 for details
about the use of this switch.
w
Firmware Upgrade Port
The Firmware Upgrade Cable that transfers the firmware upgrade
data from the administrator's computer to the CS-1754 / CS-1758
plugs into this RJ-11 connector. See p. 39 for firmware upgrading
details.
2. Console Port Section
Ports to plug in your microphone, speakers, monitor, keyboard and
mouse are found here. Each port is marked with an appropriate icon
to indicate itself.
3. CPU Port Section
The cables that link the switch to your computers plug in here. Each
CPU port is comprised of a microphone jack, speaker jack, and KVM
data connector.
Note: The shape of these 15-pin connectors has been specifically
modified so that only KVM cables designed to work with this
switch can plug in (see the Cables section on p. 3, for details).
Do NOT attempt to use ordinary 15 pin VGA connector cables
to link these ports to the computers.
4. Cable Tie Slot
If you want to use a cable tie to gather the cables together, you can
run it through this slot to attach it to the unit.
5. Power Jack
The power adapter cable plugs into this jack.
CS-1754 / CS-1758 User Manual 7