Osd Operation; Osd Overview - ATEN Master View CS-1754 User Manual

OSD Operation

OSD Overview

The On Screen Display (OSD) is used to handle all computer control
and switching procedures. All procedures start from the OSD Main
Menu. To pop up the Main Menu, tap the [Scroll Lock] key twice.
Note: You can optionally change the Hotkey to the Ctrl key (see OSD
Hotkey, p. 32), in which case you would tap [Ctrl] twice. With this
method, the [Ctrl] keys must be on the same side (both left, or
both right).
The OSD incorporates a two level (Administrator / User) authorization
system. Before the OSD Main Screen comes up, a dialog box appears
that asks you to provide your Username and Password. If the Password
Function has been set (see p. 34), you must provide them in order to
access the OSD Main Screen.
If this is the first time that the OSD is being run, or if the password
function has not been set, simply press [Enter] when the authorization
dialog box appears. The OSD Main Screen comes up in Administrator
Mode, with access to all functions.
When you invoke the OSD, a screen similar to the one below appears:
F1:GOTO
F2:LIST
ADMINISTRATOR
LIST:ALL
PN
1 - 6 - 6
1 - 6 - 7
1 - 6 - 8
1 - 7
1 - 8
2 - 1
2 - 2
2 - 3
Note: The diagram depicts the Administrator's Main Screen. The User Main
1.
Screen does not show the F4 ADM function.
OSD always starts in List view, with the highlight bar at the
2.
same position it was in the last time it was closed.
Only the ports that have been set accessible by the
3.
Administrator for the currently logged in User are visible (see
Set Accessible Ports, p. 36, for details).
28
F3:SET
F4:ADM
QV NAME
ATEN INTL. 1
ATEN INTL. 2
ATEN INTL. 3
FAX SERVER 1
FAX SERVER 2
WEB SERVER 1
WEB SERVER 2
MAIL SERVER 1
F7:SCAN X
F8:LOUT z z z
CS-1754 / CS-1758 User Manual