Hotkey Configuration; Alternate Hotkey Invocation Keys; Alternate Osd Invocation Keys - ATEN Master View CS-1754 User Manual

Aten masterview cs-1754 kvm switch: user manual

Hide thumbs Also See for Master View CS-1754:

Table of Contents

Hotkey Configuration

An alternate set of Hotkey Invocation keys is provided in case the

default set conflicts with programs running on the computers.

To switch to the alternate Hotkey Invocation set, do the following:

1. Invoke HKM (see p. 19)

2. Press and release the H key

The Hotkey Invocation keys become the Ctrl key (instead of Num Lock)

and the F12 key (instead of Minus).

Note: This procedure is a toggle between the two methods. To revert

back to the original [Num Lock] [Minus] method, invoke HKM,

then press and release the H key again.

The OSD activation method can be changed from tapping the Scroll

Lock key twice to tapping the Ctrl key twice ([Ctrl] [Ctrl]). To change the

OSD Invocation method, do the following:

1. Invoke HKM (see p. 19)

2. Press and release the T key

Note:

This procedure is a toggle between the two methods. To

revert back to the original [Scroll Lock] [Scroll Lock] method,

invoke HKM, then press and release the T key again.

For Mac systems we recommend using [Ctrl] [Ctrl] as the

OSD invocation keys since Scroll Lock is used to emulate F14

in PC to Mac keyboard emulation (see p. 27).

CS-1754 / CS-1758 User Manual

Table of Contents

Master view cs-1758