(2) Connecting Cuff and Air Bulb Unit
1. Plug the Cuff Tube into the Cuff Tube Connection of the Main Unit (
2. Plug the Controller 4-Pole Plug Connector and Controller Tube into the Connector (
of the Main Unit.
3. Plug the Controller 4-Pole Connector and the Controller Tube all the way to the end.
(3) Inserting / Replacing Batteries
1. Remove the Battery Cover.
2. Insert four AA sized batteries in the correct direction as indicated below.
3. Close the Battery Cover
Warning
• Use AA sized Alkaline or Manganese batteries.
• Do not mix new and used batteries. Replace all four AA batteries at once when replacing.
• Do not insert batteries with wet hands.
• Make sure that the polarities (+) and (-) are correct.
22
).
)