Proper Mounting Position Of The Electronics Box - Campbell KH20 Product Manual

FIGURE 6-2. Proper mounting position of the electronics box.
NOTE If the electronics box is not pushed all the way up during
mounting, you will not have enough room to attach the connectors
to the bottom of the electronics box, as the U-bolt for the rain
shield will block the position of the connectors.
3. Mount the rain shield onto the tripod or tower mast using the U-bolt
provided. Make sure that the distance between the KH20 sensor head and
the rain shield is within 5 feet so that the cables from the sensor head will
be within reach of the electronics box. Also make sure that the rain shield
is mounted vertically with an opening pointing downward so that the rain
will effectively run down the rain shield and not penetrate inside.
KH20 Krypton Hygrometer
5