Toyota HULUX 2020 Body Section Manual page 69

(3) Mounting and demounting the connector
CAUTION:
When removing the connector, don't pull the wire harness
but by holding the connector body.
(4) Heat damage
CAUTION:
① Secure an adequate clearance with the high-
temperature parts.
② Measure the temperature whenever required to
eliminate the safety problems.
Don't lay the wiring in the vicinity of the exhaust pipe
or muffler or where the wiring is exposed directly to
the exhaust gas.
(5) Serviceability
NOTICE:
Make sure that the inspection and maintenance work on
the wirings and electrical equipment can be conducted
easily after the particular building or alterations.
(6) Mounting additional buzzer
NOTICE:
When mounting a buzzer or the like on the alterations, always be sure that the sound of the buzzer is different
from and does not double as that of any of the existing buzzers.
【3】-12. Electrical wirings
- 63 -