Vehicle Width; Rear Overhang - Toyota HULUX 2020 Body Section Manual

[1] Vehicle width

CAUTION:
In order to secure safe drive, the overhang of a mounted part is expected to be less than measured from the
outermost point of the cab of the base vehicle (not including the outside mirror).
In case of narrow over fender = Less than 1800mm
In case of wide over fender = Less than 1855mm
Compliance with laws and regulation is required. (i.e. outside mirror visibility requirement)

[2] Rear overhang

The rear overhang should be as shown in the following depending on the body style and the length of the
wheelbase of the base vehicle.
CAUTION:
Please see the limitation of its extension below.
Vehicle with cargo not protruding from rear end
Ex: Van
Vehicle with cargo protruding from rear end
Ex: Cargo truck
The rear overhang is defined as the horizontal distance from the rear axle center to the rear end.
【2】-3. Securing basic performance and safety requirements
Body style Rear overhang
- 8 -