1. Headlight and turn signal switches ......2. Wiper and washer switches ..3.
Page 4
17. Climate remote control switches ......18. Instrument panel light control dial ......19.
Page 5
Instrument cluster and multi−information display overview 1. Service reminder indicators and indicator lights ..125, 132 2. Speedometer 3. Fuel gauge ..... . 4.
Page 6
Indicator symbols on the instrument cluster and multi−information display ∗ 1 Anti−lock brake system warning light ∗ 1 Brake system warning lights (U.S.A) ∗ 1 SRS warning light (Canada) ∗ 1 Engine oil replacement reminder light ∗ 1 Driver’s seat belt reminder light (for vehicles sold in U.S.A.) ∗...
Page 7
∗ 2 Electric power steering system warning light Driving ready light Automatic head light leveling system Automatic air conditioner indicator light ∗ 2 warning light ∗ 2 Hybrid system warning light Recirculate mode indicator light ∗ 3 Cruise control indicator light Windshield air flow indicator light Rear window and outside rear view mirror ∗...
Page 8
∗ 1 : For details, see “Service reminder indi- cators and warning buzzers— —Instru- ment cluster” on page 125. ∗ 2 : For details, see “Service reminder indi- cators and warning buzzers— —Multi− information display” on page 132. ∗ 3 : If this light flashes, see “Cruise con- trol”...
Page 9
SECTION – FEATURES ON NEW TOYOTA VEHICLE Toyota hybrid system Toyota hybrid systemm ........
Toyota hybrid system Toyota hybrid system operating condition Toyota hybrid system combines a gaso- Basic operations are described below. Be- line engine and electric motor power to sides, Toyota hybrid system performs vari- improve the fuel economy and minimize ous controls depending on the operating the emissions as well as to provide condition: The “Energy Monitor”...
Page 11
12p060a 12p061a 12p062a Gasoline power Electric and gasoline Storing electric power in use power in use During normal driving, the vehicle runs When driving at full throttle, additional When decreasing speed or applying the mainly on gasoline power. However, the electric power is applied from the hybrid brakes, the turning force of the wheels electric motor, using electric power gener-...
Starting your vehicle Your vehicle is equipped with push but- ton start system. The hybrid system will start automatically by pressing the “POWER” switch briefly with the brake pedal depressed. With smart function 1. Carry the key with you. 2. Press the “POWER” switch briefly with the brake pedal depressed.
For efficient use of your vehicle Drive your vehicle with a smooth accel- When parking, be sure to put the hy- INFORMATION: eration and deceleration. brid transaxle in “P”. While driving, use The gasoline engine starts and stops the hybrid transaxle in “D”. While driving, energy...
(about 200 V) and to other compo- As unwanted noise may occur in the nents that are all high voltage. High volt- reception of mobile radios, contact age cables your Toyota dealer for installation or CAUTION removal. Inverter unit Air conditioning Electric motor...
Page 15
How- start even with a jump−start to the 12 volt ever, during high speed driving you battery, contact your Toyota dealer. may feel that deceleration by engine braking is less than that of ordinary vehicle.
Page 16
When multi−information display shows this message, the master warn- ing light comes on in the instru- ment cluster. Read the message and follow the instruction. 12P009d 12p065 When you leave your vehicle, or stop or park for a while, put the hybrid transaxle in “P”.
Page 17
As sealed Nickel−Metal hydride batteries stop the hybrid system. exclusive use on electric fires. As are used, be sure to consult your Toyota D If the key is inserted into key slot, a small amount of water may be dealer when disposing of your vehicle.
Page 19
SECTION – OPERATION OF INSTRUMENTS AND CONTROLS Keys and Doors Keys ............Hybrid vehicle immobilizer system .
Toyota dealer using the key phone. cally checked to determine whether it number. corresponds to the registered ID code We recommend writing down the key num- for the vehicle.
Page 22
Carrying a smart key and pressing the “POWER” switch automatically cancels the system, which enables the hybrid system to start. The indicator light will go off. For your Toyota dealer to make you a new key with built−in transponder chip, 21p007b 21p006a your dealer will need your key number and master key.
Page 23
The FCC ID: MOZRI−24KTY indicator light will go off. MADE IN JAPAN For your Toyota dealer to make you a This device complies with Part 15 of the new key with built−in transponder chip, 21p007b FCC Rules.
Smart entry and start system For vehicles sold in Canada By carrying a smart key, you can lock and unlock the doors and start the hy- brid system. This device complies with RSS−210 of industry Canada. Operation is subject to For locking the doors, see “Locking the the following two conditions: doors with smart function”...
Page 25
INFORMATION If you do not drive your vehicle, CAUTION store the smart key, keeping it at Be sure to take the smart key with least 5 m (16 ft.) away from the ve- People with implanted pacemakers you. hicle. or cardiac defibrillators should keep In the following cases, the smart away from the smart entry and start function or wireless remote control...
Page 26
ANTENNA LOCATIONS 1. Antenna inside cabin 2. Antenna outside cabin 21p157 ALARMS AND WARNING LIGHT Your vehicle is equipped with alarms inside and outside, as well as warning light in the instrument cluster, that re- mind you if there is a problem involv- ing the smart entry and start system.
Page 27
(a) The hybrid system was not turned (b) The smart key was brought outside (d) The smart key was brought outside off and the transaxle was in a posi- the vehicle with the transaxle in a the vehicle. tion other than “P”. position other than “P”.
Page 28
(f) The smart key was brought outside (g) Preventing from being (i) Outside of effective range the vehicle. locked inside the vehicle When the “POWER” switch is pressed, it When a door other than the driver’s door When you close the door with the hybrid is determined that the smart key is not in is opened or closed with the hybrid sys- system off but with the smart key left in...
Page 29
Warning and its meaning Inside warning alarm Outside warning alarm Warning light Causes One beep The driver’s door was opened when the hybrid system was in “ACC” — — (sounds continuously) or “IG−ON” and when the transaxle was in a position other than “P”. The driver brought out the smart key from the vehicle with the hybrid One beep One beep...
Page 30
LOCKING THE DOORS WITH SMART INFORMATION FUNCTION The smart entry and start system will The rear doors are not equipped lock the doors without being inserted with smart function. into the door keyhole. When locking the doors, be sure to 21p128 When you exit the vehicle carrying the push the lock button on the outside...
Page 31
When you push and hold down the back INFORMATION door opener switch, carrying the smart key, the ID code is checked in the same The rear doors are not equipped way as in the front door case. And all the with smart function.
Page 32
CHANGING THE DOORS TO BE UN- When you take hold of the handle If another person who is not carry- LOCKED or push the back door opener to ing a smart key takes hold of an Each time you push the lock button unlock the door(s), be sure to con- outside door handle or push the together with the panic button on the...
Page 33
BATTERY POWER SAVING To reactivate the smart function, perform INFORMATION any of the following: When doors are locked, the smart entry z When changing the mode, be sure and start system transmits electromagnetic (a) Press the lock button on the outside to push both lock and panic but- waves to the outside of the vehicle at front door handle or back door while...
Page 34
If you do not intend to drive your vehicle INFORMATION for a long time, push the cancel switch to deactivate the smart function. To maintain communication with the vehicle, smart keys use built−in bat- INFORMATION tery power. The battery service life is about 1 to 3 years on average.
Wireless remote control— For vehicles sold in U.S.A. CAUTION FCC ID: MOZB31EG Changes modifications MADE IN JAPAN pressly approved by the party respon- sible for compliance could void the FCC ID: MOZB31UG 21p147 user’s authority to operate the equip- MADE IN JAPAN ment.
Page 36
“—Replacing bat- age to the key. tery” on page 38. Do not leave the key in places where If you lose your key, contact your Toyota the temperature becomes high such as dealer as soon as possible to avoid the 21p013f on the dashboard.
Page 37
For To lock: Push the lock switch. All the side details, contact your Toyota dealer. doors and back door are locked simulta- neously. At this time, the turn signal lights When the unlock switch is pressed the will flash once.
CAUTION Toyota dealer. sible for compliance could void the For vehicles sold in U.S.A. user’s authority to operate the equip- Special care should be taken that ment. small children do not swallow the re- FCC ID: MOZB21TG moved battery or components.
Page 39
(+) side O−ring when installing. 5. Replace the mechanical key and cover with slide the lock knob. After replacing the battery, check that the key operates properly. If the key still does not operate properly, contact your Toyota dealer.
Side doors 21p008a 21p009a 21p010a Driver’s side LOCKING AND UNLOCKING THE DRIV- LOCKING AND UNLOCKING WITH IN- ER’S DOOR WITH MECHANICAL KEY SIDE LOCK KNOB Insert the mechanical key into the key- Move the lock knob. hole and turn it. To lock: Push the knob forward.
Page 41
LOCKING AND UNLOCKING WITH CAUTION POWER DOOR LOCK SWITCH Push the switch. Before driving, be sure that the doors To lock: Push the switch down on the closed locked, especially front side. when small children are in the ve- 21p012b To unlock: Push the switch down on the hicle.
If the back door system does not operate down on it. After closing the back door, properly after the above procedure, there try pulling it up to make sure it is secure- may be a problem in the system. Contact ly closed. your Toyota dealer.
The power windows work when the “IG− open or close. To stop the window part- checked by your Toyota dealer. ON” mode is enabled. way, lightly move the switch in the oppo- Key off operation: If both front doors are site direction and then release it.
Page 44
CAUTION To avoid death or serious injury, you Window lock must do the following. switch Before you close the power win- 21p021b dows, always make sure there is nobody around the power windows. must also make sure heads, hands and other parts of the bodies of all occupants are kept completely inside...
Hood Never leave anyone (particularly a small child) alone in your vehicle, especially with the key still inserted or with the hybrid system other 21p026c than “OFF”. Otherwise, he/she 21p027d could power window switches and get trapped in a win- dow.
If necessary, press down gently on the and other exterior lights. front edge to lock it. This function can be deactivated or acti- vated. For details, contact your Toyota CAUTION dealer. After inserting the support rod into the slot, make sure the rod supports the hood securely from falling down on to your head or body.
Page 47
The indicator light will come on when all If any of the doors are unlocked without doors hood closed the mechanical key, wireless remote con- locked. trol transmitter or smart function and the key is not in the key slot, all the doors The system will automatically be set after will be automatically locked again.
12 volt battery ter- minal is disconnected and then recon- nected. When testing the hood, release the lock with the hood lock release lever and raise the hood. If the system does not work properly, have it checked by your Toyota dealer.
Page 49
If the cap is not tightened securely, the malfunction indicator lamp comes Make sure the cap is tightened securely. The indicator lamp goes off after driving several times. If the indicator lamp does not go off, contact your Toyota dealer as soon as possible.
Page 50
CAUTION Make sure the cap is installed se- curely to prevent fuel spillage in the event of an accident. Use only a genuine Toyota fuel tank cap for replacement. It is designed to regulate fuel tank pressure. NOTICE To prevent damage to the cap, apply force only in the turning direction to the cap.
Page 51
SECTION – OPERATION OF INSTRUMENTS AND CONTROLS Occupant restraint systems Seats ............Front seatss .
Front seats— Seats —Front seat precautions While the vehicle is being driven, all ve- Driver seat Slightly recline the back of hicle occupants should have the seatback seat. Although vehicle designs vary, upright, sit well back in the seat and prop- CAUTION many drivers can achieve the 250 erly wear the seat belts provided.
Page 53
—Seat adjustment precautions Front passenger seat Front seats (with SRS side airbags) CAUTION CAUTION CAUTION Do not adjust the seat while the vehicle is moving as the seat may The SRS side airbags are installed in The SRS front passenger airbag also unexpectedly move and cause the the driver and front passenger seats.
Page 54
—Adjusting front seats 1. SEAT POSITION ADJUSTING LEVER While adjusting the seat, do not put Hold the center of the lever and pull it your hands under the seat or near up. Then slide the seat to the desired the moving parts. Otherwise, your position with slight body pressure and hands or fingers may be caught release the lever.
Page 55
—Flattening seatbacks CAUTION Do not allow passengers to ride on the flattened seat while driving; use the seat in the normal position. 22p226a 22p227a After putting back the seat, pushing the seat and seatback for- ward and rearward to make sure it is secured in place.
Fold−down rear seat CAUTION When only rear left seat is folded down, rear seat alone can be used. Never sit on the center seat because 22p203 the rear center seat belt cannot be fastened correctly when the rear left seat is folded down. Lower the head restraints to the lowest BEFORE RETURNING REAR SEAT position.
Head restraints For your safety and comfort, adjust the CAUTION head restraint before driving, To raise: Pull it up. When returning the seatback to the To lower: Push it down while pressing the upright position, observe the follow- lock release button. ing precautions in order to prevent 22p002b Rear center head restraint—When an oc-...
Seat belts— Armrest —Seat belt precautions Toyota strongly urges that the driver and Do not allow any children to stand up or passengers in the vehicle be properly re- kneel on either rear or front seats. An strained at all times with the seat belts unrestrained child could suffer serious in- provided.
Page 59
—Fastening front and rear seat belts CAUTION Be careful not to damage the belt webbing or hardware. Take care that Persons should ride in their seats they do not get caught or pinched properly wearing their seat belts in the seat or doors. whenever vehicle moving.
Page 60
If the seat belt does not function normally, immediately contact your Toyota dealer. Do not use the seat until the seat belt is fixed, because it cannot protect an adult occupant or your child from death or serious...
Page 61
CAUTION Always make sure the shoulder belt is positioned across the center of your shoulder. The belt should be 22p005b 22p004a kept away from your neck, but not falling off your shoulder. Failure to do so could reduce the amount of protection in an accident and cause death or serious injuries in a colli- sion.
If the indicator light indi- Please contact your local Toyota dealer so 22p205a cates “OFF”, disconnect the extend- that the dealer can order the proper re- er tongue from the seat belt buckle, quired length for the extender.
Page 63
If the seat belt does not function normally, immediately contact your To connect the extender to the seat Toyota dealer. Do not use the seat belt, insert the tab into the seat belt until the seat belt is fixed, because buckle so that the “PRESS”...
—Seat belt pretensioners The front passenger’s seat belt pretension- er will not activate if no passenger is detected in the front passenger seat by the front passenger occupant classification system. However, the front passenger’s 22p009b seat belt pretensioner may activate if lug- 22p237 gage is put on the seat, or the seat belt is buckled up regardless of the presence...
Page 65
Con- fenders, front end structure or con- pant classification system and indicator sult your Toyota dealer about any re- sole light, front passenger’s seat belt buckle pair and modification.
The seat belt pretensioner assembly or In the following cases, contact your Toyota The SRS (Supplemental Restraint Sys- surrounding area has been damaged. dealer as soon as possible:...
Page 67
The driver and front passenger can child restraint system. Toyota The SRS front passenger airbag will not be killed or seriously injured by the strongly recommends that all in- activate if there is no passenger sitting in inflating airbags if they do not wear fants and children be placed in the the front passenger seat.
Page 68
The SRS front airbags are designed to deploy in severe (usually frontal) colli- sions where the magnitude and duration of the forward deceleration of the ve- hicle exceeds the designed threshold Hitting a curb, edge Falling into or jump- level. Collision from of pavement or 22p015c...
Page 69
8. Driver’s seat position sensor The airbag sensor assembly consists of a safing sensor and airbag sensor. 9. Airbag sensor assembly The front airbag sensors constantly moni- 10. Airbag module for driver tor the forward deceleration of the vehicle. (airbag and inflator) If an impact results in a forward decelera- 22p238 tion beyond the designed threshold level,...
Page 70
These Toyota strongly recommends that: er wears the seat belt even if not are usually in the nature of minor burns wearing it.
Page 71
22p020a 22p236 22p022c Do not sit on the edge of the seat Toyota strongly recommends that Do not put anything or any part of or lean against the dashboard when all infants and children be placed in your body on or in front of the...
Page 72
Do not perform any of the following or open any components, such as changes without consulting your the steering wheel pad, steering Toyota dealer. Such changes can in- wheel, column cover, dashboard terfere with proper operation of the 22p010a near...
Page 73
22p023b “IG−ON” mode is enabled or remains on for more than 6 seconds. The light comes on while driving. In the following cases, contact your Toyota dealer as soon as possible: The SRS front airbags have been in- flated. The front of the vehicle (shaded in the...
SRS side airbags and curtain shield airbags In response to a severe side impact, the CAUTION SRS side airbags and curtain shield air- bags work with the seat belts to help The SRS side airbag and curtain reduce injury by inflating. The SRS side shield airbag system is designed airbags help reduce injuries mainly to the 22p024c...
Page 75
Toyota shown in the illustration. strongly recommends that all in- The SRS side airbags and curtain shield fants and children be placed in the airbags are designed to inflate when the rear seats of the vehicle and prop- passenger compartment area suffers a se- erly restrained.
Page 76
8. Passenger’s seat belt buckle switch The SRS side airbag and curtain shield airbag system is controlled by the airbag 9. Airbag sensor assembly sensor assembly. The airbag sensor as- sembly consists of a safing sensor and airbag sensor. In a severe side impact, the side and 22p239 curtain shield airbag sensor and/or the curtain shield airbag sensor trigger(s) the...
Page 77
Deployment of the airbags happen in a fraction of a second, so the airbags must inflate with considerable force. While the system is designed to reduce serious inju- ries, it may also cause minor burns or abrasions and swelling. 22p028d 22p207a Front seats as well as parts of the front and rear pillars, and roof side rail may be...
Page 78
Do not allow anyone to kneel on the passenger seat, facing the pas- senger’s side door, since the side airbag and curtain shield airbag could inflate with considerable 22p210 22p029d speed and force. Otherwise, he/she may be killed or seriously injured. Special care should be taken espe- cially when you have a small child in the vehicle.
Page 79
Failure to follow these instructions can result in death or serious injury. Do not use seat accessories which Consult your Toyota dealer about any cover the parts where the side air- repair and modification. bags inflate. Such accessories may...
Page 80
If any of the following conditions occurs, NOTICE this indicates a malfunction of the airbags or seat belt pretensioners. Contact your Do not perform any of the following Toyota dealer as soon as possible. changes without consulting your Toyota dealer.
Page 81
—Front passenger occupant classification system In the following cases, contact your Toyota Your vehicle is equipped with a front dealer as soon as possible: passenger occupant classification sys- tem. This system detects the conditions Any of the SRS side airbags and cur- 1.
Page 82
A rear passenger lifts the front passen- The front passenger occupant classifi- ger seat cushion with their legs. cation indicator light will indicate “ON” and “OFF” when the “IG−ON” mode is Objects are placed under the front pas- enabled. After about 4 seconds, it will senger seat.
Page 83
22p240a The SRS warning light will come on and front passenger occupant classifi- cation indicator light will indicate “OFF” if there is a malfunction in the front passenger occupant classification system.
Page 84
Condition and operation in the front passenger occupant classification system Indicator/ warning light Devices Condition detected by Curtain shield Front passenger Front Side airbag on Front the front passenger Front airbag in the occupant SRS warning passenger’s the front passenger’s occupant classification front passenger...
Page 85
CAUTION Do not recline the front passenger Wear the seat belt properly. seatback so far that it touches a Make sure the front passenger’s To avoid potential death or serious rear seat. This cause seat belt tab has not been left in- injury when the front passenger occu- “OFF”...
Child restraint— —Child restraint precautions Toyota strongly urges the use of ap- When it is unavoidable to install the Toyota strongly urges use of propriate child restraint systems for forward−facing child restraint sys- proper child restraint system which children. tem on the front passenger seat, conforms to the size of the child, The laws of all 50 states in the U.S.A.
Page 87
—Child restraint system A child restraint system for a small forward−facing child restraint Do not use the seat belt extender child or baby must itself be properly system should be allowed to be when installing child restraint restrained on the seat with the lap por- installed on front passenger system on the front or rear passen-...
Page 88
—Types of child restraint system Child restraint systems are classified into the following 3 types depending on the child’s age and size. (A) Infant seat (B) Convertible seat (C) Booster seat 22p031c 22p033c Install the child restraint system following the instructions provided by its manufac- turer.
Page 89
—Installation with 3−point type seat belt 22p018c 22p034c 22p045e (A) INFANT SEAT INSTALLATION CAUTION Do not install a child restraint sys- An infant seat must be used in rear− tem on the rear seat if it interferes facing position only. Never install a rear−facing child re- with the lock mechanism of the straint system on the front passen-...
Page 90
1. Run the lap and shoulder belt through 2. Fully extend the shoulder belt to put it Contact your Toyota dealer immedi- or around the infant seat following the in the lock mode. When the belt is ately.
Page 91
22p040c 22p041c 22p039c 3. While pressing the infant seat firmly 4. To remove the infant seat, press the CAUTION against the seat cushion and seatback, buckle release button and allow the let the shoulder belt retract as far as belt to retract completely. The belt will Push and pull the child restraint sys- it will go to hold the infant seat secure- move freely again and be ready to...
Page 92
22p044b 22p042c 22p043c Move seat fully back (B) CONVERTIBLE SEAT INSTALLATION CAUTION A forward−facing child restraint sys- A convertible seat must be used in for- should allowed ward−facing or rear−facing position de- Never install a rear−facing child re- installed on front passenger pending on the age and size of the straint system on the front passen-...
Page 93
On vehicles with side airbags and curtain shield airbags, do not allow the child to lean his/her head or any part of his/her body against the door or the area of the seat, front 22p036f 22p046c or rear pillar or roof side rail from which the side airbags or curtain shield airbags deploy even if the child is seated in the child restraint...
Page 94
2. Fully extend the shoulder belt to put it 3. While pressing convertible seat Contact your Toyota dealer immedi- in the lock mode. When the belt is firmly against the seat cushion and ately. Do not install the child re-...
Page 95
22p049c 22p050b 22p051c 4. To remove the convertible seat, press (C) BOOSTER SEAT INSTALLATION CAUTION the buckle release button and allow the A booster seat must be used in for- belt to retract completely. The belt will ward−facing position only. Push and pull the child restraint sys- move freely again and be ready to tem in different directions to be sure...
Page 96
On vehicles with side airbags and curtain shield airbags, do not allow the child to lean his/her head or any part of his/her body against the door or the area of the seat, front 22p053c 22p052a or rear pillar or roof side rail from which the side airbags or curtain shield airbags deploy even if the child is seated in the child restraint...
Page 97
Always make sure the shoulder belt child from death or serious injury. is positioned across the center of Contact your Toyota dealer immedi- child’s shoulder. The belt should be ately. Do not install the child re- kept away from child’s neck, but...
Page 98
—Using a top strap Anchor brackets 22p063b 22p055c 22p056e Symbol Follow the procedure below for a child Use the anchor brackets on the back of TO USE THE ANCHOR BRACKET: restraint system that requires the use the rear seatback to attach the top strap. 1.
Page 99
CAUTION Make sure the top strap is securely latched, and check that the child re- straint system is secure by pushing 22p215 22p064e and pulling it in different directions. Follow all the installation instructions provided by its manufacturer. 2. Open the cover of the anchor brack- 3.
Page 100
—Installation with child restraint lower anchorages 22p076f 22p077h 22p078g The lower anchorages for the child re- straint system interfaced with FMVSS225 or CMVSS210.2 specification are installed in the rear seat. The anchorages are installed in the clear- ance between the seat cushion and seat- back of both outside rear seats.
Page 101
CHILD RESTRAINT SYSTEM INSTALLA- For installation details, refer to the instruc- TION tion manual equipped with each product. 1. Widen the gap between the seat CAUTION cushion and seatback slightly and confirm the position of the lower an- When using the lower anchorages chorages below the symbol in the for the child restraint system, be seatback.
Page 103
SECTION – OPERATION OF INSTRUMENTS AND CONTROLS Steering wheel and Mirrors Tilt steering wheel ......... . Outside rear view mirrorss .
Tilt steering wheel Outside rear view mirrors— CAUTION Do not adjust the steering wheel while the vehicle is moving. Doing so may cause the driver to mishan- 22p058f 22p059a dle the vehicle and an accident may occur resulting in death or serious injuries.
Page 105
—Power rear view mirror control NOTICE CAUTION If ice should jam the mirror, do not Do not adjust the mirror while the operate the control or scrape the mir- vehicle is moving. Doing so may ror face. Use a spray de−icer to free cause the driver to mishandle the the mirror.
Anti−glare inside rear view mirror —Folding rear view mirrors CAUTION Do not adjust the mirror while the vehicle is moving. Doing so may cause the driver to mishandle the ve- 22p066a 22p061a hicle and an accident may occur re- sulting in death or serious injuries. The rear view mirrors can be folded Adjust the mirror so that you can just backward for parking in compact areas.
Auto anti−glare inside rear view mirror In automatic function mode, if the mirror detects light from the headlights of the vehicle behind you, the mirror surface darkens slightly to reduce the reflected light. To turn off the automatic function, push 22p235 22p214a the “...
Vanity mirrors 22p098b 22p223 To use the vanity mirror, swing down To turn on the vanity light, slide the the sun visor and slide the cover. switch. The vanity light switch has the following positions: “ON”—Turns the light on when you swing down the sun visor.
Page 109
SECTION – OPERATION OF INSTRUMENTS AND CONTROLS Lights, Wipers and Defogger Headlights and turn signals ........Emergency flasherss .
Headlights and turn signals (with automatic light control system) NOTE: *The operating condition or sensi- tivity can be changed. Ask your Toyota dealer for details. 23p137a 23p124_1 HEADLIGHTS The automatic light control sensor is on the top of the driver’s side instrument To turn on the following lights: Twist panel.
Page 111
When the headlight switch is turned to the first or second clickstop, the brightness of the instrument cluster will be reduced slightly unless the instrument panel light control dial is turned fully on. 23p109b 23p110b NOTICE To prevent the battery from being dis- charged, do not leave the switch on longer than necessary when the hy- brid system is not running.
Page 112
Headlights and turn signals (without automatic light control system) If the turn signal indicator lights (green Automatic light cut off system lights) on the instrument panel flash faster The lights automatically turn off when the than normal, a front or rear turn signal driver’s door is opened with the hybrid bulb is burned out.
Page 113
If the turn signal indicator lights (green lights) on the instrument panel flash faster than normal, a front or rear turn signal bulb is burned out. See “Replacing light bulbs—” on page 418. 23p003d 23p004d High−Low beams—For high beams, turn TURN SIGNALS the headlights on and push the lever away To signal a turn, push the headlight/...
Emergency flashers Instrument panel light control NOTICE To prevent the battery from being dis- charged, do not leave the lights on longer than necessary when the hy- brid system is not running. 23p005a 23p138 To turn on the emergency flashers, To adjust the brightness of the instru- push the switch.
Front fog lights Interior lights (some models) To turn on the interior light, slide the switch. The interior light switch has the following positions: “ON”—Keeps the light on all the time. 23p111 23p126 “OFF”—Turns the light off. “DOOR”—Turns the light on when any door is opened.
Personal lights Luggage compartment light Key slot lights 23P012c 23p107 23p125 To turn on the personal light, push the To turn on the luggage compartment For easy access to the key slot, the key switch. To turn it off, push the switch light, push the switch upwards.
Windshield wipers and Rear window wiper and washer washer Twist the interval adjuster upward to increase the wiping time interval be- tween sweeps, and downward to de- crease it. The wiper lever must be in the “INT” posi- 23p008c tion. 23p123 To squirt washer fluid, pull the lever toward you and release it.
Rear window and outside rear view mirror defoggers For instructions on adding washer fluid, To defog or defrost the rear window, see “Adding washer fluid” on page 418. push the “CLIMATE” button to display air conditioner screen and touch the NOTICE switch.
Page 119
CAUTION Since the mirror surface can get hot, do not touch them when the switch is on. Make sure you turn the defogger off when the window is clear. Leaving the defogger on for a long time could cause the 12 volt battery to discharge.
Page 121
SECTION – OPERATION OF INSTRUMENTS AND CONTROLS Gauges, Meters and Service reminder indicators Fuel gauge ..........Odometer and two trip meterss .
24p002b page 318.) If the fuel gauge display flashes, there may be a problem in the system. In this case, contact your Toyota dealer as soon Blink as possible. The gauge indicates the approximate If the fuel level approaches “E” or the low...
Odometer and two trip meters At the first blinking of the light, the master warning light in the instrument cluster comes on and the message appears on the multi−information display to remind the driver to fill fuel. On inclines or curves, due to the move- 25p127a 24p004e ment of fuel in the tank, the low fuel level...
Km/h or MPH button 3. Trip meter reset button—Resets the two trip meters to zero, and also change the meter display. To change the meter display, quickly push and release the button. The meter 24p115 display changes in the order from the odometer to trip meter A to trip meter B, then back to the odometer each time you push.
Do this. If parking brake is off, stop immediately and contact Toyota dealer. (red indicator and buzzer) Take vehicle to Toyota dealer. If red brake system warning light is also on, stop imme- diately and contact Toyota dealer. (yellow indicator) Fasten driver’s seat belt.
Page 126
Close all doors. Fill up tank. Replace engine oil Take vehicle to Toyota dealer. If red brake system warning light is also on, stop imme- diately and contact Toyota dealer. Adjust tire inflation pressure. If light remains on, contact Toyota dealer.
Page 127
It is dangerous to continue driving curs, immediately stop your vehicle at normally when the brake fluid level is In the following case, drive directly to a safe place and contact your Toyota low. the nearest Toyota dealer. dealer. The yellow warning light comes on The red warning light does not turn while driving.
Page 128
If the vehicle speed rises above 20 km/h with the brake pedal depressed. engine, hybrid system, throttle control (12 mph) without the belt fastened, a system or warning light system itself. buzzer sounds. Contact your Toyota dealer as soon as possible to service the vehicle.
Page 129
122 for instructions.) cur, but does not indicate the malfunc- the warning light system. Contact your tion: Toyota dealer as soon as possible so The light may stay on for about 60 service the vehicle. seconds after the hybrid system is started.
Page 130
Contact your Toyota dealer in the following The system must be reset after the en- pant classification system and indicator case: gine oil replacement.
Page 131
“READY” light comes on. your Toyota dealer as soon as pos- (l) Low Tire Pressure Warning Light If the light comes on while driving, the sible.
Page 132
It is normal if they go out after a while. If any service reminder indicator or warn- ing buzzer does not function as described above, have it checked by your Toyota Type 2 dealer as soon as possible.
Page 133
If the indicator comes on... Do this. Stop immediately and contact Toyota dealer. Stop and check. Stop and check. Take vehicle to Toyota dealer. Take vehicle to Toyota dealer immediately. Take vehicle to Toyota dealer. Take vehicle to Toyota dealer.
NOTICE off the road to a safe place and stop the the vehicle and check your hybrid system. engine immediately. Call a Toyota dealer For detailed instructions, see “If your ve- When the charging system warning or qualified repair shop for assistance.
Page 135
If this light comes on, take your ve- light goes off. Even if the hybrid system warning light hicle to the Toyota dealer as soon as comes on, you can temporarily increase b. The hybrid battery is discharged. possible. In this case, you may feel...
Page 137
SECTION – OPERATION OF INSTRUMENTS AND CONTROLS “POWER” switch, Transmission and Parking brake Push button start system ........Hybrid transaxlee .
Push button start system— —Key slot CAUTION Do not put your finger into the key slot. Your finger might be injured. 25p118 21p006a NOTICE Observe the following instructions, or the key mechanism might be damaged and will not work properly. z The key should be operated with a clean hand and fingers.
Page 139
Observe the following instructions or slot. the push switch start system may not Should you find anything unusual, work properly. contact your Toyota dealer as soon as 25p113 z The switch should be operated with possible. a clean finger. Do not use an oily or dirty finger.
Page 140
—Selecting the push button start system mode (with smart function—on some models) 1) “ACC” (Green indicator is turned on) 3) “OFF” (Indicator is turned off) Accessories such as the radio operate. The hybrid system is off. Pressing the “POWER” switch briefly with- You may hear a motor sound in the en- out depressing the brake pedal in the gine compartment for a few seconds after...
Page 141
For starting tips, see “How to start the NOTICE hybrid system—” on page 348. z The hybrid system cannot If in an emergency, you must turn the started when the shift position is in hybrid system off while the vehicle is “N”.
Page 142
—Selecting the push button start system mode (without smart function) In the “ACC” mode, pressing the “POW- INFORMATION ER” switch briefly while depressing the brake pedal will start the hybrid system. You can insert a genuine key while in If you leave your vehicle in the “ACC” the “IG−ON”...
Page 143
For starting tips, see “How to start the NOTICE hybrid system—” on page 348. z The hybrid system cannot If, in an emergency, you must turn the started when the shift position is in hybrid system off while the vehicle is “N”.
Hybrid transaxle Your hybrid transaxle has an electronic shift lever system to minimize incorrect operation. This means you can only shift to other position from “P” when the brake “P” position switch pedal is depressed. With the following improper shifting, the rejection function operates and a beep sounds so the hybrid transaxle cannot be shifted.
Page 145
Do not hang anything on the lever. pedal, shift the shift lever to “D”. Should you find anything unusual, CAUTION contact your Toyota dealer as soon as possible. (a) Shift lever Never put your foot on the accelera- The shift position is displayed on the in- tor pedal while shifting.
Page 146
If the driver’s door is opened when the CAUTION transaxle is in “N”, “D” or “B”, beep sounds and a warning message appears Be careful when downshifting on a on the multi−information display to warn slippery surface. Abrupt shifting you to shift the transaxle to “P”. could cause the vehicle to skid or If you push the “P”...
Page 147
In these cases, stop your vehicle in a control the speed using only the brake safe and level place, apply the parking pedal operation without depressing the ac- brake securely and contact your Toyota celerator pedal. dealer immediately. Regenerative brake...
The slip indicator light blinks in the follow- may not function correctly. When ing conditions also. replacing the tires or wheels, con- tact your Toyota dealer. (See The vehicle tires are racing. Utmost “Checking and replacing tires” on care is required when driving.
Page 149
The slip indicator light comes on when the In the following cases, contact your Toyota “IG−ON” mode is enabled and will go off dealer: after the “READY” light comes on. If the The warning light does not come on indicator light does not come on when the after the “IG−ON”...
Check the tires. If the tire is flat, change to the spare tire and have the flat tire repaired by the nearest Toyota deal-...
Page 151
Avoid abrupt maneuvering and bra- CAUTION As an added safety feature, your ve- king. If the vehicle tires deteriorate, hicle has been equipped with a tire you could lose control of the steer- Each tire, including the spare (if pro- pressure monitoring system (TPMS–...
Page 152
Al- placed by the nearest Toyota dealer sure telltale (tire pressure warning ways check the TPMS (tire pressure or an authorized tire dealer. The light).
Page 153
TIRE PRESSURE WARNING If non−genuine Toyota wheels are used. LIGHT BLINKS... If tire chains are used. If the tire pressure warning light blinks If the tire inflation pressure is 50 kpa when the “POWER”...
Page 154
Have sible for compliance could void the frequency energy and, if not installed the ID code registered by your Toyota user’s authority to operate the equip- and used in accordance with the instruc- dealer.
Page 155
When you change performed. checked at your Toyota dealer. the set tire inflation pressure, it is neces- If you push the tire pressure reset switch sary to initialize the tire pressure warning accidentally and initialization is performed, system.
Parking brake When parking, firmly apply the parking CAUTION brake to avoid inadvertent creeping. To set: Fully depress the parking brake Do not push the reset switch without pedal. For better holding power, first de- first adjusting the tire inflation pres- press the brake pedal and hold it while sure to the specified level.
Cruise control The cruise control allows you to cruise the vehicle at a desired speed over 40 km/h (25 mph) even with your foot off the accelerator pedal. Your cruising speed can be maintained up or down grades within the limits of hybrid 25p007a 25p006a system...
Page 158
Toyota deal- The indicator light flashes again. er at the earliest opportunity. The indicator light goes out after it comes on. If this is the case, contact your Toyota dealer and have your vehicle inspected.
Page 159
SECTION – OPERATION OF INSTRUMENTS AND CONTROLS Multi−information display Reference ..........Before using the multi−information displayy .
Page 160
Reference "Type 1 1. Multi−information display* (See page 163 for details.) 2. “DISPLAY” button display adjustment screen shown. (See page 237 for details.) 3. “INFO” button The information menu screen is shown. (See page 166 for details.) 4. “CLIMATE” button The air conditioning operation screen is 27p163b shown.
Page 161
"Type 2 1. Multi−information display* (See page 163 for details.) 2. “DISPLAY” button display adjustment screen shown. (See page 237 for details.) 3. “INFO” button The information menu screen is shown. (See page 166 for details.) 4. “CLIMATE” button The air conditioning operation screen is 27p162b shown.
Page 162
"Type 3 1. Multi−information display* (See page 163 for details.) 2. “DISPLAY” button display adjustment screen shown. (See page 237 for details.) 3. “INFO” button The information menu screen is shown. (See page 166 for details.) 4. “CLIMATE” button The air conditioning operation screen is shown.
Page 163
Before using the multi−information display Switch operation When the “ACC” mode is enabled, the This system operates mainly initial screen appears and the system be- switches on the screen. To protect the gins operating. screen, lightly touch switches screen with your finger. When you touch After a few seconds, the previous mode a switch on the screen or on the bezel, display will appear.
Page 164
Functions 26p148 26p027c 27p142a Type 1* Type 3 2. Adjustment The contrast and brightness on the screen *: For other functions (Maintenance, Cal- are adjusted. For details, see page 237. ender and Beep setting), see the sepa- rate “Navigation System Owner’s Manu- al”.
Page 165
27p150 26p203a 24p117 3. Air conditioner 4. Audio 5. Warning display Climate setting operations are available. The radio and compact disc operations The warning symbol for the faulty system For details, see page 286. are available. For details, see page 242. appears.
Page 166
Information Type 1 Type 2 and Type 3 26p009b 27p148 26p027c Type 1 Type 3 Push the “INFO” button to display the “Information Menu” screen. Trip information: The energy monitor and fuel consumption screen are selected. Telephone: Telephone screen is shown. (See page 171 for details.) Language: Select...
Page 167
—Trip information Energy monitor screen Touch the “Energy” switch. Vehicle driving condition, hybrid system operating condi- tion and energy recovery condition are shown. 27p151a 27p152a 1. Indicates the flow of energy by orange and yellow arrows. While the energy is recovered, arrows change...
Page 168
—Language Fuel consumption screen Touch the “Consumption” switch. Average fuel consumption, momentary fuel con- sumption recovered energy shown. 26P180 27p154 1. Indicates the past momentary fuel con- sumption every 5 minutes. 2. Indicates the energy recovered for 5 minutes with symbols. One symbol re- fers to 50 Wh or the energy by which a 50 W bulb illuminates for an hour.
—Screen setting You can select the language shown on SWITCH COLOR the screen. Touch your desired switch Select the desired switch color and on the screen. touch “OK”. DELETE PERSONAL DATA The following personal data can be de- 27p145 leted or returned to their default set- tings: Phone book data Dialed numbers and received calls...
Page 170
27p145 27p342 27p343 1. Touch “Delete personal data”. 2. Touch “Delete”. 3. Touch “Yes”. The “Delete personal data” screen ap- The “Confirmation for deleting all personal pears. data” screen appears.
Page 171
Hands−free system BACKGROUND COLOR Hands−free system allows you to make or receive a call without taking your Select the desired background color hands off the steering wheel by con- and touch “OK”. necting your cellular phone. This system supports Bluetooth. Bluetooth is a wireless data system by which you 26p030c can call without your cellular phone being...
Page 172
INFORMATION In the following conditions, the sys- tem may not function. The cellular phone is turned off. 27p333 27p334 The current position is outside the communication area. The cellular phone is not connected. The cellular phone has a low bat- tery.
Page 173
The other party’s voice outputs from the 2. Indicates amount battery driver’s speaker. When the received calls charge left. or received voice outputs, the audio from the audio system will be muted. Empty Full INFORMATION It is not displayed while the Bluetooth is 27p180 connecting or the phone book data is be- Talk alternately with the other party...
Page 174
An antenna for the Bluetooth connec- When you release your vehicle: INFORMATION tion is built in the display. The indica- A lot of personal data is registered tion of the Bluetooth connection may This system supports the following when you use the hands−free system. turn yellow and the system may not When you release your vehicle, initial- service.
Page 175
Entering a Bluetooth phone CAUTION: Radio Frequency Radiation FCC ID: BABBT003A Exposure To use the hands−free system, you IC ID: 2024B−BT003A need to enter your phone into the sys- MADE IN JAPAN This equipment complies with FCC radi- tem. Once you have registered it, you ation exposure limits set forth for uncon- This device complies with Part 15 of the can make a hands−free call.
Page 176
27p182 27p183 27p184 3. Touch the “Settings” switch to dis- 4. Touch the “Bluetooth” switch to dis- 5. Touch the “Register” switch to con- play “Settings” screen. play the “Bluetooth Settings” screen. nect your cellular phone to the sys- tem.
Page 177
27p185 27p186 27p187 6. When this screen is displayed, input 7. When the connection is completed, When this screen is displayed, follow the the Passkey displayed on the screen this screen is displayed. guidance on the screen to try again. into the phone.
Page 178
Connecting a Bluetooth phone (b) manually (a) automatically When the auto connection failed or turned off, you have to connect Blue- tooth manually. 27p189 27p188 27p190 When the “ACC” or “IG−ON” mode is enabled, the selected Bluetooth phone will be automatically connected and the When you register your phone, auto connection result is displayed.
Page 179
Reconnecting the Bluetooth phone Calling on the Bluetooth phone If the Bluetooth phone is disconnected After you enter the Bluetooth phone, with a poor reception from the Blue- you can call by using hands−free sys- tooth network when the “ACC” or “IG− tem.
Page 180
Each time you touch “A”, an inputted (ii) By phone book digit is deleted. You can call by phone book data which is transferred from your cellular phone. When you touch “ ”, the number you called last is inputted. The system has one phone book.
Page 181
(iii) By dialed numbers You can call by dialed number. system memorizes up to 5 dialed num- bers. If it is over 5, the oldest number is deleted. 27p195 27p197 This cannot be operated while you are driving. 27p196 When you call by phone book, the Touch “...
Page 182
(iv) By received calls You can call by received calls. When a call is received, the system memo- rizes up to 5 numbers. If it is over 5, the oldest number is deleted. 27p198 27p199 This cannot be operated while you are driving.
Page 183
(v) By speed dial You can call by registered telephone number which you selected from a phone book, dialed numbers and re- ceived calls. (See page 191 for regis- 27p200 27p198 tering the speed dial.) 27p201 When a telephone number registered in Touch “...
Page 184
(vi) By voice recognition Example: Call Charlize 27p202 27p194 27p203 2. Touch the desired number to call. You can change the page by touch- You can call by giving a command. (For ing “Speed Dial 2” or “Speed Dial the operation and command of voice 3”.
Page 185
You: Push the talk switch. Cancelling the voice recognition System: “After the beep, please say the The voice recognition will be cancelled name.” when you do the following. You: “Charlize.” Keep on pushing the talk switch. System: “Charlize chosen, when ready, Push the button of the steering 27p204...
Page 186
Dialing by phone number You: Push the talk switch. Sending a tone You can call by giving a desired num- System: “After the beep, please say the You can send a tone by giving a de- ber. number.” sired number. You: “812387”...
Page 187
(c) Receiving on the Bluetooth (vii) By POI call (with Navigation System) To adjust the volume of received call: Touch “–” or “+” or use the volume phone switch of the steering wheel. On the international phone call, the other party’s name may not be displayed cor- rectly depending on the cellular phone which you have.
Page 188
(d) Talking on the Bluetooth To input a Key: Touch the “0−9” switch. phone To transfer the call Touch the “Transfer Call” switch. You cannot change from hands−free call 27p206 to cellular phone call while you are driv- ing. When you change from cellular phone call 27p209 to hands−free call, the hands−free screen will be displayed and you can operate it...
Page 189
You can do this operation when you want Sending a tone by the speed tone to operate an answering machine or use a You can send a tone by the speed tone. telephone service in bank for example. (For registering the speed tone, see You can register the phone number and “Registering the speed tone”...
Page 190
(e) Changing the settings of the Bluetooth phone 27p212 27p214 27p311 2. Touch the desired switch to send a You can change the settings of the tone. phone. Touch the “Settings” switch to display “Settings” screen.
Page 191
(i) (a) Registering the speed dial You can register the desired telephone number from phone book, dialed num- bers and received calls. Up to 17 speed dial numbers can be registered. 27p216 27p217 The 6th entry is the speed dial for redial- ing.
Page 192
27p218 27p219 27p220 4. Touch the desired telephone number. 5. Touch the switch you want to regis- 6. If you select a switch you registered ter in. before, this screen is displayed. The latest dialed number is registered in Touch the “Yes” switch if you want to the 6th item (speed redial).
Page 193
Deleting the speed dial individually You can delete “01” − “17” of the speed dial individually. If you delete them all at once, all of 17 numbers are deleted. 27p222 27p223 27p221 2. Touch the switch you want to delete. 3.
Page 194
Deleting all of the speed dial (b) Registering the speed tone You can register the desired tone num- ber. Up to 6 speed tone numbers can be registered. 27p225 27p224 27p226 2. Touch the “Yes” switch. 1. Touch the “Delete All” switch of “Speed Dial”.
Page 195
27p227 27p228 27p229 2. Use the software keyboard to input 3. Input the number and touch “OK”. 4. Touch the desired switch you want the name. to register in.
Page 196
Editing the speed tone. You can edit the speed tone. 27p230 27p232 27p231 5. If you select a switch you registered 2. Touch the switch you want to edit. before, this screen is displayed. Touch the “Yes” switch if you want 1.
Page 197
Deleting the speed tone individually. You can delete “1” to “6” of the speed tone. If you delete them all at once, all of 6 numbers are deleted. 27p233 27p234 27p235 3. Use the software keyboard to input 4. Input the number and touch “OK”. the name.
Page 198
Deleting all the speed tone 27p232 27p236 27p237 2. Touch the switch you want to delete. 3. Touch the “Yes” switch. 1. Touch the “Delete All” switch of “Speed Tone”.
Page 199
(ii) Setting the volume 27p238 27p240 27p239 2. Touch the “Yes” switch. 2. Touch the “−” or “+” switch to ad- just the “Voice Volume” or “Ring 1. Touch the “Volume” switch to dis- Volume”. play the “Volume Setting” screen. Voice Volume adjusting other...
Page 200
Automatic volume settings for high Initializing the settings speed You can initialize the settings. You can set the volume one step up when the vehicle speed is over 80 km/h. (When it is under 70 km/h, pre- vious volume is back.) 27p242 Each time you touch the “Adaptive Volume Control”...
Page 201
(iii) Setting the screen Receiving Call Display You can select the method of the re- ceiving call display. 27p244 27p243 27p245 2. Do detailed settings screen and touch “OK”. 1. Touch the “Screen” switch to display the “Screen Settings” screen. Touch the “Full”...
Page 202
Auto answer The Bluetooth connection status at startup When a call is received, the display automatically changes to the talking screen and you can start to talk on the phone (without touching any switch) af- ter the preset time. 27p247 27p189 27p246 Touch the “ON”...
Page 203
Initializing the settings (iv) Setting the phone book You can initialize the settings. You can register phone numbers in the phone book. 27p249 27p248 27p250 Touch the “Yes” switch. Touch the “Default” switch. Touch the “Phone Book” to display the “Phone Book Management”...
Page 204
Transferring a telephone number You can transfer the telephone numbers in your Bluetooth phone to the system. Up to 1000 person’s data (up to 2 num- bers a person) can be registered in the phone book. 27p251 27p253 Transfer it while the engine is running. 27p252 You can do the detailed settings of 2.
Page 205
27p254 27p255 27p256 3. Touch the “Overwrite” or “Add To” 4. Transfer the phone book data to the 5. When this screen is displayed, the switch. system using the Bluetooth phone. transfer is completed. This screen appears while transferring. To cancel it, touch the “Cancel” switch. If the transferring is interrupted on the way, the phone book data transferred until then can be memorized in the system.
Page 206
Registering the phone book data You can register the phone book data. 27p257 27p259 27p258 When this screen is displayed, try the 2. Touch the desired switch to edit the transfer operation again. phone book. 1. Touch the “Register” switch.
Page 207
Editing the name When you do not input the name, the number is displayed. 27p260 27p262 27p261 3. When you complete the edit, touch 2. Use the software keyboard to input the “OK” switch. the name. 1. Touch the “Name” switch.
Page 208
Editing the phone number You can register a phone number in “TEL1” and “TEL 2” separately. Up to 2 numbers a person can be registered. 27p264 27p265 27p263 2. Input the number and touch ”OK”. 3. Select the desired icon. 1.
Page 209
Selecting the group Setting the voice recognition You can set a group for a contact (for You can set the voice recognition. Up example: “Family”, “Friends”, “Of- to 20 numbers can be registered for the fice”...). It will then be easier for you voice recognition.
Page 210
Adding data to the phone book You can add data to the phone book. 27p269 27p270 27p271 2. Select the phone number and touch 3. Touch the “PLAY” switch to play the the “REC” switch to record a voice- voicetag. tag.
Page 211
Editing the data You can edit the registered data. 27p272 27p273 27p274 2. Select the data you want to add log 3. Confirm added data data to. screen and touch “OK”. 1. Touch the “Edit” switch.
Page 212
27p272 27p275 27p276 2. Select the data you want to edit. 3. Touch the desired switch. When you also touch the “Edit” switch on this screen, you can edit it. When you edit the data, touch “OK”.
Page 213
Deleting the data You can delete the data. When you release your vehicle, delete all your data on the system. 27p272 27p278 27p277 2. Touch the desired switch. 3. Touch the “Yes” switch. 1. Touch the “Delete” switch of “Phone Book”.
Page 214
You can also delete it in the following way. 27p194 27p279 27p193 2. Select the desired data. 3. Touch the “Delete” switch. 1. Touch the “Phone Book” switch.
Page 215
Deleting all the phone data 27p280 27p282 27p281 4. Touch the “Yes” switch. 2. Select the deleting method. 1. Touch the “Delete All” switch of Group Data ..deleting all the phone “Phone book”. data in group All Contact Data deleting all the phone...
Page 216
3. When you select “Group Data”, the You can also delete it in the following “Select Group” screen is displayed. way. 27p284 27p283 27p193 5. Touch the “Yes” switch. 4. Select the desired group. 1. Touch the “Phone Book” switch.
Page 217
Registering a group name register groups. “No Group”, “Group 01” − “Group 19” are registered by default. You can change “Group 01” − “Group 19” 27p285 27p286 into desired names. 27p287 2. Touch the “Delete All” switch. 3. Touch the “Yes” switch. 1.
Page 218
Selecting a group icon 27p288 27p289 27p290 2. Select the group you want to regis- 3. When you complete all the edit, ter. touch the “OK” switch. 1. Touch the “Icon” switch.
Page 219
Editing a group name 27p291 27p293 27p292 2. Select the desired icon. 2. Use the software keyboard to input the name. 1. Touch the “Name” switch.
Page 220
Deleting a group name You can delete the group names indi- vidually or all at once. If you delete a group name, that group will return to default setting. (excluding “No Group”) 27p288 27p295 27p294 2. Select the group you want to delete 3.
Page 221
Deleting all the group names Deleting the log data You can delete the log data individually or all at once. When you release your vehicle, delete all the data on the system. 27p297 (a) individually 27p296 27p298 2. Touch the “Yes” switch. 1.
Page 222
(b) all at once 27p299 27p301 27p300 2. Touch the “Yes” switch. 2. Touch the “Yes” switch. 1. Touch the “Delete All” switch on the “Outgoing Calls” or “Incoming Calls” screen.
Page 223
(v) Setting the security Changing the security code The security code is 4 digits and the When you set the security, you can pre- default is “0000”. vent people from using some functions of the hands−free system. It is useful Choose a new code that is hard for other when you leave your car with the hotel people to know.
Page 224
Phone Book Lock When you set the phone book lock, you have following functions locked. Display of the phone book screen and 27p304 27p305 transferring, registering, editing, delet- ing the phone book data. Display of speed dial screen, register- ing, deleting the speed dial and speed dialing.
Page 225
Initializing the security code You can initialize the settings. 27p306 27p307 27p308 1. Touch the “ON” switch. 2. Input the security code and touch “OK”. 1. Touch the “Default” switch.
Page 226
(f) Setting a Bluetooth phone Selecting a Bluetooth phone In case you register more than one Bluetooth phone, you need to choose a favorite one. 27p309 27p310 27p311 2. Input the security code and touch 3. Touch the “Yes” switch. “OK”.
Page 227
27p312 27p313 27p314 2. Touch the “Select Telephone” switch Although you can register up to 6 Blue- 3. Touch the “OK” switch. to display “Select Telephone” screen. tooth phones in the system, only one You can select the Bluetooth phone Bluetooth phone can function at a time.
Page 228
When another Bluetooth phone is trying to Displaying Bluetooth information connect, this screen is displayed. You can see or set the information of the Bluetooth phone on the system. Device Name the name of the Blue- tooth phone which is dis- 27p315 played screen.
Page 229
Changing a Device Name You can change a device name. If you change a device name, the name regis- tered in your cellular phone is not changed. 27p318 27p319 27p318 2. Touch the “Change” switch. 3. When complete setting, touch “ ”.
Page 230
Changing the Bluetooth settings When you change the device name or Passkey, do the following. You can change the display and settings of Bluetooth information on the system. information displays following items. 27p320 Device Name name Bluetooth network. 27p321 can change it. Passkey .
Page 231
27p322 27p323 27p324 2. Touch “Change” “Device 3. Use the software keyboard to input 4. Input a Passkey with 4 − 8 digits. Name” or “Passkey”. the device name. When you touch “A”, the inputted digit is You can input up to 20 characters. deleted.
Page 232
Initializing the Bluetooth settings. You can initialize the settings. 27p325 27p327 27p326 5. When complete setting, 2. Touch the “Yes” switch. touch “ ”. 1. Touch the “Default” switch.
Page 233
Deleting a Bluetooth phone 27p329 27p330 27p328 2. Select the telephone you want to de- 3. Touch the “Yes” switch. lete and touch “OK”. 1. Touch the “Delete” switch of “Blue- tooth Telephone”.
Page 234
When you delete the telephone while Displaying information of another Bluetooth phone is connected, Bluetooth phone you delete this message is displayed. You can display the information of the Bluetooth phone before you delete it and you can make sure whether the telephone you delete is correct or not.
Page 235
—Speech command system The speech command system enables If the hands−free system does not re- you to operate the hands−free system spond or the confirmation screen does not by giving a command. disappear, push speech command switch and try again. If no command is given, a beep sounds and the indicator disappears 6 seconds 27p203...
Page 236
—Help screen This system has a function which dis- (b) Operating Guide plays the voice recognition help screen. You can see the command list and op- erating guide on it. (a) Command List 27p334 27p362 27p361 "Microphone 1. Touch the “Operating Guide” tab on It is unnecessary to speak directly into the upper side of the screen.
Page 237
Adjustment Contrast and brightness adjustment Type 1 Type 2 and Type 3 CONTRAST “+”: Strengthens the contrast of the screen. CONTRAST “–”: Weakens the contrast of the screen. 26p024a 27p142a BRIGHTNESS “+”: Brightens the screen. BRIGHTNESS “–”: Darkens the screen. The screen turns off when you touch the “SCREEN OFF”.
Page 238
Outside temperature display Depending on the position of the head- light switch, the screen changes to the day mode or night mode. To display the screen in the day mode even with the headlight switch on, touch “DAY MODE” on the adjustment screen for 27p146a 27p155a brightness and contrast control.
Page 239
The outside temperature is shown rang- ing from −30_C (−22_F) up to 50_C (122_F) at the upper right of the energy consumption or energy monitor screen or the upper left of the air conditioner screen.
Page 241
SECTION – OPERATION OF INSTRUMENTS AND CONTROLS Audio system Reference ..........Using your audio systemm .
Reference "Type 1 1. Multi−information display screen* With (See page 248 for details.) Navigation 2. Ejecting a compact disc System (See page 266 for details.) 3. Compact disc slot (See page 266 for details.) 4. Frequency tuning and file search (See page 253 and 274 for details.) 5.
Page 243
10. Adjusting the volume (See page 247 for details.) 11. Compact disc load button (See page 266 for details.) 12. Audio operation screen display button (See page 248 for details.) *: In this manual, English version screens are shown as an example.
Page 244
"Type 2 1. Multi−information display screen* (See page 248 for details.) 2. Ejecting a compact disc (See page 266 for details.) 3. Compact disc slot (See page 266 for details.) 4. Frequency tuning and file search (See page 253 and 274 for details.) 5.
Page 245
"Type 3 1. Multi−information display screen* (See page 248 for details.) 2. Ejecting a compact disc (See page 271 for details.) 3. Compact disc slot (See page 271 for details.) 4. Frequency tuning (See page 253 for details.) 5. Scan tuning (See page 255 for details.) 6.
Using your audio system— —Some basics This section describes some of the basic TURNING THE SYSTEM ON AND OFF features Toyota audio system. Push “PWR” button to turn the audio sys- Some information may not pertain to your tem on and off. The system turns on in system.
Page 247
VOLUME CONTROL To adjust the volume, push and turn the “VOL”. Type 1 and Type 2 Type 1 Type 3 Type 2...
Page 248
26p260 26p136a Type 3 Radio (Type 1) Radio (Type 3) Push “AM”, “AM·SAT”, “FM”, “DISC” or “DISC·AUX” button to turn on that mode. The selected mode turns on directly. Push these buttons if you want to switch from one mode to another. If the disc is not set, the compact disc player does not turn on.
Page 249
26p205c 26p138a 26p206b Compact disc (Type 1) Compact disc (Type 3) TONE AND BALANCE Touching the “SOUND” switch on the The switches for radio and compact screen displays the sound adjustment disc player operation are displayed on screen. the liquid crystal display. Touch them lightly and directly on the screen.
Page 250
How good an audio program sounds to you is largely determined by the mix of the treble, mid−range, and bass levels. In fact, different kinds of music and vocal programs usually sound better with differ- ent mixes of treble, mid−range and bass. 26p261 A good balance of the left and right stereo channels and of the front and rear sound...
Page 251
Vehicles with compact disc changer: from the beginning of the program appear your Toyota through an automatic car on the display. wash. Touch the “ASL” switch.
Radio operation (a) Listening to the radio Push these buttons to choose either an AM or FM station. “AM”, “FM1” or “FM2” appears on the dis- play. If your vehicle is equipped with satellite radio broadcast system, when you push “AM·SAT”...
Page 253
Push and turn this knob to step up the station band or to step down. Your radio automatically changes to stereo reception when a stereo broadcast is re- ceived. “ST” appears on the display. If the signal becomes weak, the radio reduces 26P197 26p260 the amount of channel separation to pre-...
Page 254
(c) Selecting a station Tune in the desired station using one of the following methods. Preset tuning: Touch the switch (1−6) for the station you want. The switch (1−6) is 26p141a 26p262 highlighted in green and station frequency appears on the display. Manual tuning: Turn the “TUNE·FILE”...
Page 255
Preset scan tuning: Push the “SCAN” button or touch the “SCAN” switch (AM mode only) and hold it until you hear a beep. “P. SCAN” appears on the display. The radio will tune in the next preset sta- tion up or down the band, stay there for 26p126 26p263 a few seconds, and then move to the next...
Page 256
(d) RDS (Radio Data System) (1) Program type Each time you touch the “TYPE A” or “TYPE "” switch, program type changes as in the following: 26p142a 26p264 ROCK EASY LIS (Easy listening) CLS JAZZ (Classical music and Jazz) R&B (Rhythm and Blues) INFORM (Information) RELIGION Type 3...
Page 257
26p257 26p265 26p258 Type 3 Type 1 Type 3 When you touch the “TYPE A” or “TYPE "”, “TYPE SEEK” switch appears. Touch the switch and the system starts to seek the station in the relevant program type. Type 2...
Page 258
(2) Traffic program: A station that regularly broadcasts traf- fic information is automatically located. When touch “TRAF” switch, “TRAF SEEK” appears on the display and 26p266 26p259 the radio will start seeking any traffic pro- gram station. If any traffic program station is not found, “NOTHING”...
Page 259
(3) Radio text If the system receives a radio text from RDS station, “MSG” appears on the dis- play. Touch the “MSG” switch, and a text message is displayed on the screen. 26p267 26p145b Type 1 Type 3 In case a text message is not accepted in a screen, you can touch the “MSG”...
To listen to a satellite radio broadcast in Customers should have their radio ID your vehicle, an additional genuine Toyota ready; the radio ID can be found by se- satellite receiver and antenna must be lecting the “channel 000” on the radio.
Page 261
(e) Selecting a channel Tune in the desired channel using one of the following methods. Preset tuning: Touch the switch (1−6) for the channel you want. The switch (1−6) is 26P197 26p213b highlighted in green. Manual tuning within the channel cate- gory: Turn the “TUNE·FILE”...
Page 262
To scan the preset channels: Push the “SCAN” button and hold it until you hear a beep. “P.SCAN” appears on the display. The radio will find the next preset chan- nel, stay there for a few seconds, and then move to the next preset channel. To select a channel, push the “SCAN”...
Page 263
26p216c (g) Displaying the title and name When you touch the “TEXT” switch, the song/program title and the artist name/fea- ture are displayed. Up to 32 alphanumeric characters can be displayed. (Some information will not be fully displayed.)
Page 264
The XM antenna is not connected. Check whether the XM antenna cable is attached securely. ANTENNA A short−circuit occurs in the antenna or the surrounding antenna cable. See a Toyota certified dealer. You have not subscribed to the XM satellite radio. The radio is being updated with the latest encryption code.
Page 265
NOTICE If this equipment does cause harmful This XM tuner supports “Audio Ser- interference to radio or television re- vices” (Music and Talk) of only XM This equipment has been tested and ception, which can be determined by satellite radio and “Text Information”, found to comply with the limits for a turning the equipment off and on, the linked to the respective “Audio Ser-...
Compact disc player operation (Type 1 and Type 2) (a) Inserting or ejecting compact disc Setting all the discs: NOTICE Type 1: 1. Push the “LOAD” button until you Do not insert one disc stacked on top hear a beep. Setting a single compact disc: of another one or feed them in con- The amber indicators at both ends of the...
Page 267
26p129c 26p205c Ejecting a single alone: The numbers of the trays where the com- (b) Playing a compact disc pact disc is not set are dimmed. 1. Touch the switch (1−6) to highlight Type 1: the disc number you want to eject. Type 2: Push the “DISC·AUX”...
Page 268
The player will skip any empty disc trays. When the AUX adapter is in use, each time you push the “DISC·AUX” button, the audio switches the compact disc mode and AUX mode alternately. For details about AUX adapter, see page 306. 26p205c Type 2: Push the “DISC·AUX”...
Page 269
(e) Fast Forward/Reverse Push the “SEEK·TRACK” button and hold it to fast forward/reverse the disc. When you release the switch, the player will resume playing. 26p234b 26p235b When fast forwarding, if you reach the end of the final track, the player will go back to the start track and continue op- eration.
Page 270
After all the discs are scanned in one pass, normal play resumes. 26p218c 26p236b (j) Searching for a desired track (l) Displaying the track list Touch the “SCAN” switch briefly, the play- Touch the “TRACK LIST” switch. er will play the next track for 10 seconds, The track list screen will be displayed.
“CD” appears on the display. If the malfunction is not rectified, take your vehicle to your Toyota dealer. The discs set in the player are played continuously. The track number and the time from the beginning of the program...
Page 272
(c) Selecting a desired track (d) Searching for a desired track (e) Other compact disc player functions “SEEK·TRACK” button: Use for direct Touch the “SCAN” switch. “RPT” switch: Use it for automatic repeat access to a desired track. of the track you are currently listening to. “SCAN”...
The inside of the player unit may be cancel it, touch the “TITLE OFF” switch. too hot due to the very high ambient temperature. Eject the disc and allow the player to cool down. If the malfunction is not rectified, take your vehicle to your Toyota dealer.
Page 274
Turn the knob clockwise to search up the files. Turn the knob counterclockwise to search down the files. 26p239b 26p240a (d) Selecting a desired folder (e) Selecting a desired file “FOLDER” switch: “TRACK” button: Touch either side of the “FOLDER” switch. Push the “SEEK·TRACK”...
Page 275
26p241b 26p242b (f) Fast Forward/Reverse (g) Repeating the same file (i) Listening to the files in the folder you are listening to, in random or- Push the “SEEK·TRACK” button and hold Touch the “RPT” switch briefly. When the it to fast forward/reverse the disc. When file is finished, the player will automatical- you release the switch, the player will ly go back to the beginning of the file and...
Page 276
(k) Searching for a desired file (m) Displaying the folder list (n) Displaying the file list 26p243b 26p244b 26p245b Touch the “SCAN” switch briefly, the play- Touch the “FOLDER LIST” switch. Touch the “FILE” switch. er will play the next file for 10 seconds, The folder list screen will be displayed.
Push “+” to increase the If the malfunction is not rectified, take volume and “–” to decrease the volume. your vehicle to your Toyota dealer. The volume continues to increase or de- crease while the switch is being pressed.
Audio system operating hints (a) When the radio mode is selected (b) When the “CD” mode is selected NOTICE “ ” or “ ” switch: Push this switch for “ ” or “ ” switch: Use this switch to To ensure correct audio system op- seek tuning or to select a station.
Page 279
Here are some common reception prob- Bumpy roads or other vibrations may lems that probably do not indicate a prob- make your compact disc player skip. Fading—AM broadcasts are reflected by lem with your radio: the upper atmosphere—especially at night. If moisture gets into your compact disc These reflected signals can interfere with player, you may not hear any sound...
Page 280
Special shaped discs Low quality discs Use only compact discs marked as shown above. The following products may not be playable on your compact disc player. Copy−protected CD CD−R (CD−Recordable) CD−RW (CD−Re−writable) Z17058 CD−ROM Transparent/translucent discs Labeled discs...
Page 281
NOTICE Do not use special shaped, transpar- ent/translucent, low quality or labeled discs such as those shown in the il- lustrations. The use of such discs may damage the player or changer, or it may be impossible to eject the disc.
Page 282
MP3 WMA FILES WMA files can contain a WMA tag that The MP3/WMA player does not play is used in the same way as an ID3 back MP3/WMA files from discs record- MP3 (MPEG Audio Layer 3) and WMA tag. WMA tags carry information such er using packet write data transfer (Windows Media Audio) are audio com- as track title, artist name.
Page 283
CD−R and CD−RW discs Recordings on CD−R/CD−RW cannot be played using the DDCD (Double CD−R/CD−RW discs that have not been Density CD) system. subject to the “finalizing process” (a 001.mp3 proc ess that allows discs to be played TERMS 002.wma on a conventional CD player) cannot Packet write—...
Page 284
ISO 9660 format— WMA— This is the international standard for the WMA (Windows Media Audio) is an audio formatting of CD−ROM folders and files. compression format developed by Micro- For the ISO 9660 format, there are two soft. It compresses files into a size small- levels of regulations.
Page 285
SECTION – OPERATION OF INSTRUMENTS AND CONTROLS Air conditioning system Controls ........... Climate remote control .
Controls "Type 1 1. Passenger compartment temperature display 2. Outside temperature display 3. Temperature control switch 4. Air flow control switch 5. Fan speed control switch 6. Automatic control switch 7. Air intake control switch 8. Rear window and outside rear view mirror defogger switch (See page 118 27p165a for details.)
Page 287
"Type 2 1. Passenger compartment temperature display 2. Outside temperature display 3. Temperature control switch 4. Air flow control switch 5. Fan speed control switch 6. Automatic control switch 7. Air intake control switch 8. Rear window and outside rear view mirror defogger switch (See page 118 27p164a for details.)
Page 288
"Type 3 1. Outside temperature display 2. Passenger compartment temperature display 3. Air flow control switch 4. Fan speed control switch 5. Temperature control switch 6. OFF switch 7. Automatic control switch 8. Rear window and outside rear view mirror defogger switch (See page 118 27p337 for details.) 9.
Page 289
The automatic air conditioning automat- ically maintains the set temperature. This air conditioning features automatic fan speed and air flow control which auto- matically selects the most suitable fan speed and air flow to control the tempera- ture. The hybrid system must be in the “IG−ON”...
Page 290
(a) Climate control SETTING OPERATION—automatic con- When one of the manual control buttons trol is depressed while operating in automatic mode, the mode relevant to the depressed button is set. Other conditions continue to be adjusted automatically. However, oper- ating the air flow outlets or fan speed will 27p111a turn off the automatic control.
Page 291
2. Use the “TEMP” switch to set the SETTING OPERATION—manual control desired temperature. When manual control The temperature of air delivered to the switches is touched while operating in passenger compartment will be controlled automatic mode, the mode relevant to automatically according to the setting.
Page 292
If manual air flow selection is desired— The outlets from which air is delivered If quick heating or cooling is desired— can be selected manually by touching the switch. The function of each mode is as follows: 1. Panel—Air flows mainly from instrument panel vents.
Page 293
Touch the “TEMP” switches and hold ei- If manual fan speed control is desired— 1. Fan speed at low ther one until the maximum figure or mini- 2. Fan speed at high mum figure appears. The fan speed can be set to your desired speed by touching the appropriate air flow control switch.
Page 294
If manual switching of air intake is de- The air intake control switch is used to 2−way air intake control sired— switch the air intake between the OUT- To improve fuel economy, OUTSIDE AIR SIDE AIR mode and RECIRCULATED AIR mode control changes when the air in- mode.
Page 295
(b) Windshield defogging and defrosting If manual on−off of the air conditioning To remove interior fog on the wind- is desired— shield— Touch the “A/C” switch to turn the air Touch the windshield air flow switch. conditioning on and touch it again to turn To remove frost or exterior fog on the the air conditioning off.
Page 296
OUTSIDE AIR and the fan speed se- To cool off your Toyota after it has lector to any setting except “OFF”. been parked in the hot sun, drive with If following another vehicle on a dusty the windows open for a few minutes.
Climate remote control Instrument panel vents (steering switches) “ ” switch: Use this switch to turn on or off the rear window and outside rear view mirror defoggers. (For details, see page 118.) 27p006a CAUTION 27p104 Operate the switches with due care while you are driving to avoid acci- dents.
—Checking and replacing the Air conditioning filter— air conditioning filter The air conditioning filter may clog af- ter long use. The filter may need to be replaced if the air flow of the air condi- tioning and heater experiences extreme reductions in operating efficiency, or if the windows begin to fog up easily.
Page 299
82p007a 82p107 82p008b 1. Open the glove box, and slide off 2. Push in each side of the glove box 3. Pull the filter case toward you to the damper as shown. to disconnect the claws. take it out.
Page 300
5. Install the filter and filter case in the reverse order of removal. Set the filter in the filter case correctly. INFORMATION 82p009a The air filter should be installed prop- erly in position. The use of air condi- tioning with the air filter removed may cause deteriorated dustproof per- formance and then affect air condi- tioning performance.
Page 301
SECTION – OPERATION OF INSTRUMENTS AND CONTROLS Other equipment Clock ............Rear view monitor system .
Rear view monitor system Clock The rear view monitor system assists CAUTION the driver by displaying an image of the rear of the vehicle while backing Never depend on rear view up. The displayed image on the screen monitor system entirely when back- is a horizontally reversed mirror image ing up.
Page 303
When replacing the tires, please consult If the back of the vehicle is hit, the your Toyota dealer. If you replace the position and mounting angle of the tires, the area displayed on the screen camera may change. Be sure to may change.
Page 304
AREA DISPLAYED ON SCREEN When water droplets are adhering to the camera, or when humidity is high Image is displayed approximately level (for example, when it rains) on screen. When foreign matter (for example, The area detected by the camera is snow or mud) adheres to the camera limited.
Power outlets The power outlets are designed for power supply for car accessories. The hybrid system must be in “ACC” or “IG−ON” for the power outlets to be used. NOTICE 28p010a z To prevent the fuse from being blown, do not use the electricity over the total vehicle capacity of 12V/120W.
AUX adapter Rear console box If you install an audio system other than a genuine audio system, you will not be able to use the AUX adapter. 28P129 An AUX adapter is installed in the rear To use the rear console box, open as console box.
Glove boxes Garage door opener To open the glove boxes, push each Indicator light button. The inside of the upper glove box is sepa- rated by the partition. When storing a lon- ger object, remove the partition. 28p002a 28p128 With the instrument panel lights on, the lower glove box light will come on when the lower glove box is open.
Page 308
(a) Programing the HomeLink The HomeLink in your vehicle has 3 buttons and you can store one program for each button. To ensure correct programing into the 28p130a 28p131 HomeLink , install a new battery in the 25 to 75 mm hand−held transmitter prior to program- HomeLink (1 to 3 in.)
Page 309
6. Repeat steps 2 through 5 for each re- The ceiling mounted garage door opener maining HomeLink button to program motor should recognize another device. HomeLink unit and be able activate the garage door up/down. Programming a rolling code system 4.
Page 310
Toyota vent potential harm or damage. dealer for assistance. Do not use this HomeLink...
Auxiliary boxes To use the box, open the lid as shown This device complies with Part 15 of the in the following illustrations. FCC Rules and with RSS−210 of the IC Rules. Operation is subject to the fol- CAUTION lowing two conditions: (1) This device may not cause harmful interference, and To reduce the chance of injury in (2) this device must accept any interfer-...
Cup holders The cup holder is designed for holding cups or drink−cans securely. To use the cup holder, open the lid. 28p005b CAUTION 28p003a Do not place anything else other than cups or drink−cans on the cup holder, such items thrown about in the compartment and possibly injure people in the vehicle during sudden braking or in...
Bottle holders Tie−down hooks NOTICE Do not put a cup or open bottle in the bottle holder because the con- tents may spill when the door opens or closes. 28p109 22p120 The bottle holders are designed to hold To secure your luggage, use the tie− bottles securely.
Luggage storage box Luggage cover 28p112a 28p113a 28p114 1. To open the luggage storage box, turn 2. Hold the lid open by inserting the sup- To use the luggage cover, pull it out of the knob to the “UNLOCK” position and port rod into the slot.
Page 315
28p115 28p116a 28p125 To remove the luggage cover, lift it up. You can stow the luggage cover in the To replace the luggage cover, adjust the luggage storage luggage cover so that “TOP” is facing upwards. compartment as shown in the illustration. At that time, adjust the cover so that “TOP”...
Floor mat 28p007b 28p008b Use a floor mat of the correct size. CAUTION If the vehicle carpet and floor mat have 2 holes, then they are designed for use Make sure the floor mat is properly with locking clips. Attach the floor mat to placed on the vehicle carpet.
Page 317
....... Your Toyota’s identification ........
To help prevent gas station mixups, your If your engine knocks... to the future economy and long life of Toyota has a smaller fuel tank opening. your vehicle: The special nozzle on pumps with un- If you detect heavy knocking even when...
Page 319
Toyota, be sure that it has an octane try changing gasoline brands. If this does The WWFC consists of four categories rating no lower than 87.
Fuel pump shut−off system FUEL TANK CAPACITY The fuel pump shut−off system stops sup- If you plan to drive your Toyota in another country... plying fuel to the engine to minimize the 45 L (11.9 gal., 9.9 lmp.gal.) risk of fuel leakage when the engine stalls...
Do not drive, idle or park your ve- as possible. Remember, your Toyota hicle over anything that might burn dealer knows your vehicle and its easily such as grass, leaves, paper three−way catalytic converter sys-...
The exhaust gases cannot your Toyota dealer. Continued in- chamber. This oil as well as some part escape, making this a particularly halation of exhaust fumes can lead of the oil film left on the cylinder wall dangerous situation.
Page 323
Oil consumption: Max. 1.0 L per 1000 is essential that the oil level be checked km (1.1 qt./600 miles, 0.9 Imp.qt./600 regularly. Toyota recommends that the oil miles) level be checked every time you refuel When judging the amount of oil con- the vehicle.
Coolant flow control The coolant in this tank is hot even valve if the engine and radiator are cold. replacement coolant, 30p103 contact your Toyota dealer. touch bolts pieces) painted in yellow. In case the bolts are loosened, Electric water pump...
If the brake system have passed. warning light comes on, immediately stop your vehicle and contact your Toyota deal- The brake pedal stroke may be short when you press the “POWER” switch with the brake pedal depressed.
Page 326
ANTI−LOCK BRAKE SYSTEM Depressing the brake pedal on slippery CAUTION road surfaces such as on a manhole cov- The anti−lock brake system is designed er, a steel plate at a construction site, to automatically help prevent lock−up of Do not pump the brake pedal if the joints in a bridge, etc.
Page 327
CAUTION Anti−lock brake system is not de- signed to shorten the stopping dis- overestimate anti−lock tance: Always drive at a moderate brake system: Although the anti−lock speed and maintain a safe distance brake system assists in providing ve- from the vehicle in front of you. 30p002b hicle control, it is still important to Compared with vehicles without an...
Page 328
It is normal if it turns off after where in the components monitored by a while. the warning light system. Contact your Toyota dealer as soon as possible to Depressing the brake pedal repeatedly service the vehicle. may turn on the light. It is normal if it turns off after a few seconds.
This checked and replaced by your Toyota is power steering motor noise, and is not NOTICE dealer as soon as possible. Expensive ro- a malfunction. tor damage can result if the pads are not If you repeat the operation which will replaced when necessary.
This number is on the left top of the axle case as shown. instrument panel, and can be seen through the windshield from outside. This is the primary identification number for your Toyota. It is used in registering the ownership of your vehicle.
Suspension and chassis Theft prevention labels Your new vehicle carries theft preven- CAUTION tion labels which are approximately 47 mm (1.85 in.) by 12 mm (0.47 in.). Do not modify the suspension/chassis The purpose of these labels is to reduce with lift kits, spacers, springs, etc.
Tire information— —Tire symbols (Standard tire) This illustration indicates typical tire symbols. 1. Tire size—For details, see “Tire size” on page 336. 2. DOT Tire Identification Number (TIN)—For details, see “DOT and Tire Identification Num- ber (TIN)” on page 335. 3.
Page 333
6. Radial tires or bias−ply tires—A radial tire has “RADIAL” on the sidewall. The tire not marked with “RADIAL” is a bias−ply tire. 7. “TUBELESS” or “TUBE TYPE” —A tubeless tire does not have a tube inside the tire and air is direct- ly filled in the tire.
Page 334
—Tire symbols (Compact spare tire) This illustration indicates typical tire symbols. 1. “TEMPORARY USE ONLY”—A compact spare tire is identified by the phrase “TEMPORARY USE ONLY” molded into its sidewall. This tire is designed for temporary emergency use only. For details, see “Compact spare tire”...
Page 335
—DOT and Tire Identification Number (TIN) 6. Maximum cold tire inflation The “DOT” symbol certifies that the pressure—This means the pres- tire conforms to applicable Federal sure to which a tire may be in- Motor Vehicle Safety Standards. flated. For recommended cold tire inflation pressure, see “Tires”...
Page 337
150 would wear conditions on specified government purchasers of Toyota vehicles with in- one and a half (1−1/2) times as well test surfaces of asphalt and concrete. formation on uniform tire quality grad-...
Page 338
Temperature A, B, C—The tempera- ture grades are A (the highest), B, and C, representing the tire’s resis- tance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel.
Page 339
—Glossary of tire terminology Tire related term Meaning tire inflation pressure when the vehicle has been parked for at least 3 hours or more, or it has not been driven more than 1.5 km or 1 mile under that Cold tire inflation pressure condition the maximum cold inflation pressure to which a tire may be inflated and it is Maximum inflation pressure...
Page 340
Tire related term Meaning the combined weight of those installed regular production options weighing over 2.3 kg (5 lb.) in excess of those standard items which they replace, not pre- Production options weight viously considered in curb weight or accessory weight, including heavy duty brakes, ride levelers, roof rack, heavy duty battery, and special trim Vehicle capacity weight the rated cargo and luggage load plus 68 kg (150 lb.) times the vehicle’s desig-...
Page 341
Tire related term Meaning the load on an individual tire that is determined by distributing to each axle Vehicle normal load on the tire its share of the curb weight, accessory weight, and normal occupant weight (distributed in accordance with Table 1 that follows) and dividing by two Weather side the surface area of the rim not covered by the inflated tire Table 1–...
For location of the tire Towing capacity D Be careful to keep the vehicle bal- and loading information label, see Toyota does not recommend towing anced. Locating the weight as far “Checking tire inflation pressure” on a trailer with your vehicle. Your ve- forward as possible helps maintain page 405.
Page 343
—Capacity and distribution Cargo capacity depends on the to- NOTICE D Never allow anyone to ride in tal weight of the occupants. the luggage compartment. It is Do not load the vehicle beyond (Cargo capacity) = (Total load capac- not designed for passengers. the vehicle capacity weight giv- ity) –...
Page 344
4. The resulting figure equals the Toyota does not recommend towing available amount of cargo and lug- a trailer with your vehicle. Your ve- gage load capacity. For example, hicle is not designed for trailer towing. if the “XXX” amount equals 1400 lbs.
Types of tires 199 kg – 176 kg = 23 kg. Determine what kind of tires your CAUTION (444 lb. – 388 lb. = 56 lb.) vehicle is originally equipped with. As shown in the above example, if the 1. All season tires Even if the total load of occu- number of occupants increases, the All season tires are designed to pro-...
Page 346
2. Summer tires CAUTION Summer tires are high−speed capabil- ity tires best suited to highway driving D Do not mix summer and all sea- under dry conditions. son tires on your vehicle as Since summer tires do not have the this can cause dangerous han- same traction performance as snow dling characteristics, resulting...
Page 347
SECTION STARTING AND DRIVING Before starting the hybrid system ......How to start the hybrid system .
Page 348
How to start the hybrid (b) Turning on the hybrid system— (a) Before starting system (Using the smart Before starting the hybrid the hybrid system system function—on some models) 1. Check the area around the vehicle be- 1. Apply the parking brake firmly. fore entering it.
Page 349
If the “READY” the “READY” light. If this happens, contact light does not come on, contact your Toyota dealer. your Toyota dealer. Before starting the hybrid system, be sure CAUTION z When you start the hybrid system to follow the instructions in “(a) Before...
Page 350
To dry them, drive vehicle cautiously while lightly pressing the brake pedal with the park- ing brake applied. If they still do not work safely, pull to the side of the road and call a Toyota dealer for assistance.
Page 351
Do not drive in excess of the speed protection for engine coolant. limit. Even if the legal speed limit Only use “Toyota Super Long Life Coolant” Before driving off, make sure the permits it, do not drive over 140 similar high quality ethylene glycol...
Page 352
Section 8−3 tells you how to visually inspect the 12 volt battery. Your Do not use your parking brake when Toyota dealer will be pleased to check the there is a possibility it could freeze. level of charge. When...
Page 353
Stop−and−go driving sion. carrier for a wheelchair, scooter, bi- wastes power. cycle, etc. Your Toyota is not designed Keep your vehicle tuned−up and in Avoid unnecessary stopping for trailer towing or for the use of tow top shape. A dirty air cleaner, improp- braking.
Page 354
CAUTION Never turn off the hybrid system to coast down hills. Your power steering and brake booster will not function without the hybrid system running. Also, the emission control system op- erates properly only when the hybrid system is running.
Have the key checked at your electrical burns, or damaged electronic Toyota dealer. If none of your keys work, components, these instructions must be there may be a malfunction in the hybrid followed precisely.
Page 357
If the on yourself or in your eyes, remove “READY” light does not come on, any contaminated clothing and flush contact your Toyota dealer. the affected area with water imme- diately. Then get immediate medical attention. If possible, continue to...
Page 358
7. If the engine in the vehicle with the booster battery is not running, start it Exclusive jump starting Exclusive jump terminal cover and let it run for a few minutes. During starting terminal jump starting, run the engine at about 2000 rpm with the accelerator pedal lightly depressed.
Page 359
“READY” light is on. If the hybrid bat- Jumper tery warning light comes on in the mul- cable ti−information display, the hybrid battery is also discharged. Contact your Toyota 50p080a dealer. 50p045c 11. Carefully disconnect the cables in the exact reverse order: the negative cable and then the positive cable.
4. If the coolant is leaking, stop the hy- system. Wait until the steam subsides steering will not work so steering and brid system immediately. Call a Toyota before opening the hood. If there is no braking will be much harder than usu- dealer for assistance.
You should have it checked as bility of death or serious injury: a highway. Park on a level spot soon as possible at your Toyota dealer. with firm ground. D Follow jacking instructions. 2. Stop the hybrid system and turn D Do not put any part of your on your emergency flashers.
Page 362
NOTICE D Make sure to set the jack prop- erly in the jack point. Raising Do not continue driving with a the vehicle with jack improper- deflated tire. Driving even a ly positioned will damage the short distance can damage a vehicle or may allow the ve- 50p007a tire and wheel beyond repair.
Page 363
The compact spare tire can be used NOTICE CAUTION many times, if necessary. It has tread life of up to 4800 km (3000 miles) de- Your ground clearance is re- D The compact spare tire was de- pending on road conditions and your duced when the compact spare signed especially for your To- driving habits.
Page 364
—Required tools and spare tire 50p010e 50p008c 50p009a 1. Get the required tools and spare To remove the jack, unlock the tight- To remove the spare tire: tire. ening strap. 1. Remove the luggage storage box. 1 Wheel nut wrench To store the jack, make sure it is se- 2.
Page 365
—Blocking the wheel —Loosening wheel nuts When installing the jack box, align the arrows on the jack box with the ones on the body. 50p011b 50p085a 2. Block the wheel diagonally op- 3. Loosen all the wheel nuts. posite the flat tire to keep the Always loosen the wheel nuts before vehicle from rolling when it is raising the vehicle.
Page 366
—Positioning the jack —Raising your vehicle CAUTION Never use oil or grease on the bolts or nuts. The nuts may loos- en and the wheels may fall off, 50p014e 50p015c which could cause a serious ac- cident. 4. Position the jack at the jack 5.
Page 367
—Changing wheels CAUTION Never get under the vehicle when the vehicle is supported by the jack alone. 50p086 50p017c 6. Remove the wheel nuts and Before putting on wheels, remove any change tires. corrosion on the mounting surfaces with a wire brush or such. Installation Lift the flat tire straight off and put it of wheels without good metal−to−met- aside.
Page 368
—Reinstalling wheel nuts —Lowering your vehicle CAUTION Never use oil or grease on the bolts or nuts. Doing so may lead to overtightening the nuts and 50p018c 50p019c damaging the bolts. The nuts may loosen and the wheels may fall off, which could cause a seri- ous accident.
Page 369
—Stowing flat tire 9. Restow all the tools and jack se- CAUTION curely. Then secure the flat tire in the luggage compartment D When lowering the vehicle, with the tire tie−down belts and make sure all portions of your tie−down hooks as follows body and all other persons 50p081a around will not be injured as...
Page 370
50p082a 50p083a 50p084a 2. Put the flat tire on the center of 3. Pass the belts through the center 4. Attach the other ends of the belts the luggage storage box lid with hole of the wheel as shown above. to the rear tie−down hooks.
Page 371
D When carrying the flat tire, se- slowly to the nearest Toyota dealer cure it using a tire tie−down and fill to the correct pressure. belts. Otherwise, the flat tire...
If towing is necessary, we recommend TOWING PRECAUTIONS: (a) Towing with wheel lift type truck— you to have it done by your Toyota Use a safety chain system for all towing, —From front dealer or a commercial tow truck ser- and abide by the state/provincial and local vice.
Page 373
Towing in this manner may be done only (c) Towing with sling type truck If towing is necessary, we recommend on hard−surfaced roads for a short dis- you to have it done by your Toyota tance speeds. Also, NOTICE...
Page 374
—Installing towing eyelet Before towing, release the parking brake CAUTION and put the hybrid transaxle in “N”. The hybrid system must be in the “IG−ON” Use extreme caution when towing ve- mode. hicles. Avoid sudden starts or erratic In the following cases, as the front wheels driving maneuvers which would place might be locked by means of the parking excessive stress on the emergency...
Toyota dealer if you can give them the key number and master key. Even if you lose only one key, contact your Toyota dealer to make a new key. If 50p047a you lose all your master keys, you cannot 50p048a make new keys;...
Be sure to have the back door opener To open the back door from inside, per- checked/repaired by your Toyota dealer. form the following procedure. 1. Open the luggage storage box (See “Luggage storage box” on page 314.)
Page 377
Customer Experience Center 1-800-331-4331 www.toyotaownersonline.com POWERED 2006 Pocket Reference Guide MN 00452-PRG06-PRI Printed in USA 10/05...
Page 378
Remove the luggage storage box. Your dealership and the entire staff of Toyota Loosen the bolt and remove it. Motor Sales, U.S.A., Inc. wish you many years Remove the jack box.
Jump starting Rear air vent Seat belts Seat belts-Shoulder belt anchor Spare tire & tools Tire Pressure Warning System Programmable by customer. For dealer-programmable features, please visit your Toyota dealer. ® HomeLink is a registered trademark of Johnson Controls, Inc.
Page 380
BASIC HYBRID VEHICLE OPERATION Hybrid Synergy Drive System Key fob The Hybrid Synergy Drive System utilizes a computer Master key controlled gasoline engine and electric motor to provide the most efficient combination of power for the vehicle. To conserve energy, when the brakes are applied, braking force generates electricity which is then sent to the battery.
BASIC HYBRID VEHICLE OPERATION Keyless entry Smart Key system (if equipped) Locking operation Push Unlocking operation Push ONCE: Driver door TWICE: All doors By carrying a Smart Key, the vehicle can be locked, unlocked and the Hybrid System engaged without handling the key.
Page 382
BASIC HYBRID VEHICLE OPERATION Turning the Hybrid System ON Unlocking operation Pressing down on the brake pedal Front door Rear hatch NOTE: After unlocking, if a door is not opened within thirty (30) seconds, all doors will relock for safety. Refer to your Owner’s Manual, and the following section of this guide for Smart Key unlocking programmable options.
Page 383
BASIC HYBRID VEHICLE OPERATION Parking & turning OFF the Hybrid System Shifting Park button Shift position Shift lever Park button Reverse (Buzzer sounds) Neutral While depressing brake pedal, push Park button above the shift lever, when the vehicle is Drive at a complete stop.
OVERVIEW Instrument panel Without navigation system With navigation system 1, 2 Headlight, turn signal and front fog light controls Audio Wiper and washer controls 12V Power outlet “POWER” Park button Clock Electronic shift lever “AUDIO” switch (Multi-information display control) Ignition key (key fob) slot “CLIMATE”...
OVERVIEW Instrument cluster Hybrid vehicle battery warning Electric power steering system warning Smart Entry and Start warning Turn signal indicator Headlight high beam indicator Service reminder indicators and indicator lights Headlight indicator Speedometer Fuel gauge Tail light indicator Odometer and two trip meters Slip indicator Indicator symbols Automatic head light leveling system...
OVERVIEW Fuel tank door opener and cap Hood release Driver seat Pull Pull up Turn Store Pull up Engine maintenance NOTE: If not tightened enough, check engine “ ” indicator may illuminate. NOTE: MAINTAIN GASOLINE IN THE TANK AT ALL TIMES.
Page 387
® garage doors, estate gates, security lighting, etc. Turn Refer to the Owner’s Manual for more details. For programming assistance, contact the Toyota Customer Experience Center at 1-800-331-4331, or visit http://www.homelink.com Front fog lights come “ON” only when the headlights ®...
FEATURES/OPERATIONS Seat adjustments-Front Tilt steering wheel Angle Lock release lever Hold wheel, push lever down, set angle then return lever. Note: Do not attempt to adjust while the vehicle Position Seatback angle is in motion. Seats-Head restraints Windows Front Rear Driver side Down Window lock...
FEATURES/OPERATIONS Air conditioning/Heating Steering wheel switches Type 1 functions “A/C AUTO” Temperature Air intake selector Windshield vent With navigation system Rear window and outside rear view mirror defoggers Cruise control Turning system ON/OFF Type 2 functions System ON/OFF With navigation system Setting a speed Resume/Increase speed Cancel...
Page 390
FEATURES/OPERATIONS Audio Audio operation screen Audio Type 1 functions operation screen Audio Push RADIO To preset a station Tune in the desired station and touch a station selector icon (1-6) until you hear a beep. Push to turn To scan for stations Push “SCAN.” Push again to hold Eject CD ON/OFF selection.
Page 391
FEATURES/OPERATIONS AUX audio jack (if equipped) Cup and Bottle holders Cup holder front Cup holder rear Center console Bottle holder Front Door Refer to the Owner’s Manual for more details. Clock Power outlets Instrument panel (12V) Center console box (12V) H-Hour set M-Minutes set Luggage storage box...
SAFETY AND EMERGENCY FEATURES Door locks Emergency flashers Lock Unlock Push Doors-Child safety locks Rear air vent Rear door Move the lever to “LOCK,” allowing the door to be opened only from the outside. Seat belts NOTE: The air vent on the right side of the rear Take up seatback is designed to assist in cooling the Hybrid slack...
SAFETY AND EMERGENCY FEATURES Jump starting Jump start terminal Exclusive jump starting terminal cover The jump start terminal is in the fuse box. To access the terminal, open the fuse block cover and the jump start terminal cover. Connecting jumper cables Recommended connecting point Connect positive (red) jumper cable to the jump...
CORROSION PREVENTION AND APPEARANCE CARE Protecting your Toyota from corrosion ......Washing and waxing your Toyota .
Page 395
Now, it is up to be dry. wet the mud and debris without remov- you. Proper care of your Toyota can help ing. The lower edge of doors, rocker High ambient temperatures can cause ensure long−term corrosion prevention.
Page 396
Washing and waxing your Toyota Check the interior of your vehicle. Wa- Your Toyota is a hybrid vehicle. Pay When driving in a coastal area ter and dirt can accumulate under the particular attention when washing your When driving on a road sprinkled with floor mats and could cause corrosion.
Page 397
To prevent damage to the antenna, wells. after you wash it. make sure to remove it before driving your Toyota through an automatic car 2. Wash with mild car−wash soap, 4. To prevent water spots, dry the vehicle wash.
Page 398
Cleaning the interior 3. Wax the vehicle again when water First vacuum over the upholstery to re- CAUTION does not bead but remains on the sur- move loose dirt. Then, using a sponge or face in large patches. soft cloth, apply the soap solution to the Do not wash the vehicle floor with vinyl.
Page 399
Do not apply water—the best results are Windows NOTICE obtained by keeping the carpet as dry as The windows may be cleaned with any possible. Read the shampoo instructions z Do not use organic substances (sol- household window cleaner. and follow them closely. vents, kerosene, alcohol, gasoline, NOTICE etc.) or alkaline or acidic solutions.
Page 400
If you have any questions about the leather these could cleaning of your Toyota, your local cause discoloring. Toyota dealer will be pleased to answer them. z Use of a nylon brush or synthetic fiber cloth, etc. may scratch the fine grained surface of the leather.
Page 402
SECTION VEHICLE MAINTENANCE AND CARE Maintenance requirements ........General maintenance .
Page 403
See “Owner’s War- form them are presented in Section 8. or if you prefer, your Toyota dealer will be ranty Information Booklet” or “Owner’s pleased to do them at a nominal cost.
Page 404
Information Booklet” or “Owner’s Manual should investigate the cause or take your mation. Supplement” for the details. vehicle to your Toyota dealer or a quali- Radiator, condenser and hoses fied service shop immediately. It is recom- Check that the front of the radiator and...
Page 405
INSIDE THE VEHICLE Seat belts OUTSIDE THE VEHICLE Check that the seat belt system such as Items listed below should be checked Items listed below should be performed buckles, retractors and anchors operate regularly, e.g. while performing periodic from time to time, unless otherwise properly and smoothly.
Page 406
Be on the alert for changes in perfor- If you notice any of these clues, take your mance, sounds, and visual tip−offs that vehicle to your Toyota dealer as soon as Check the tires carefully for cuts, indicate service is needed. Some impor- possible.
Page 407
Toyota dealer comes on. In this case, your vehicle may to prepare the vehicle for re−testing. not pass the I/M test and need to be repaired.
Read separate compartment—the engine, radiator, just the body jack supporting it. Al- Toyota Warranty statement for details and ways use automotive jack stands or exhaust manifold and spark plug suggestions. boots, etc.—will be hot. So be care- other solid supports.
Page 412
Call your dealer z Add only “Toyota Super Long Life water to prevent it damage to parts for information concerning recycling Coolant” or similar high quality eth- or paint.
Positioning the jack When jacking up your vehicle with the Do not raise the vehicle with some- jack, position jack correctly as one in the vehicle. shown in the illustrations. When raising the vehicle, do not CAUTION place any objects on top of or un- derneath the jack.
CHECKING BRAKE FLUID Tools: need to perform do−it−yourself mainte- Parts (if level is low): Funnel nance. Remember all Toyota parts are de- SAE J1703 or FMVSS No.116 DOT 3 REPLACING LIGHT BULBS signed in metric sizes, so your tools must brake fluid be metric.
Page 416
SECTION – DO−IT−YOURSELF MAINTENANCE Engine and Chassis Checking the engine oil level ....... . . Checking the coolant level .
Checking the engine oil level 3. Reinsert the dipstick—push it in as far If the oil level is below or only slightly as it will go, or the reading will not be above the low level, add engine oil of Low level Full level correct.
Page 418
If SAE 5W−30 oil is not available, SAE NOTICE 10W−30 oil may be used. However, it “Toyota Genuine Motor Oil” is used in should be replaced with SAE 5W−30 at z Be careful not to spill engine oil on your Toyota vehicle. Use Toyota approved the next oil change.
Toyota engines. tainers to help you select the oil you with hybrid system temperature. However, Please contact your Toyota dealer for fur- should use. if the level is on or below the “LOW” line, ther details about “Toyota Genuine Motor add coolant.
Page 420
If you can find no leak, have your Toyota Canada—“Toyota Super Long Life dealer test the cap pressure and check Coolant” is a mixture of 55% coolant and for leaks in the cooling system. 45% deionized water. This coolant pro- vides protection down to about −42_C...
Toyota dealer as soon as possible. Do tion, take your vehicle to a Toyota dealer. not drive if the red brake system warn- ing light is on. Call a Toyota dealer for assistance. CAUTION If the fluid level goes down soon after your...
Checking tire inflation pressure Keep your tire inflation pressures D Always use a tire inflation pres- at the proper level. sure gauge. The appearance of a tire can be misleading. Besides, The recommended cold tire inflation tire inflation pressures that are pressures, tire sizes and the com- even just a few pounds off can de- bined weight of occupants and cargo...
Page 423
In case of applying too much air, press the center of the valve If a tire frequently needs refilling, have it checked by your Toyota deal- and release the air to adjust.
Checking and replacing tires The tires on your Toyota have built−in High tire pressure (overinfla- Tread wear indicator tread wear indicators to help you tion)— know when the tires need replace- D Poor handling ment. When the tread depth wears to 1.6 mm (0.06 in.) or less, the indica-...
Page 425
As for the maximum load of the tire, see the load Toyota recommends all four tires, limit at maximum cold tire inflation or at least both front or rear tires pressure mentioned on the sidewall be replaced at a time as a set.
It is designed for temporary use only. To equalize tire wear and help ex- tend tire life, Toyota recommends that you rotate your tires accord- ing to the maintenance schedule. (For scheduled maintenance infor- mation, please refer to the “Sched-...
Installing snow tires and chains WHEN SNOW TIRES SNOW TIRE INSTALLATION TIRE CHAIN SELECTION CHAINS Snow tires should be installed on all Regulations regarding the use of tire Snow tires or chains are recommended wheels. chains vary according to location or when driving on snow or ice.
Correct replacement wheels are available avoid losing control of the vehicle. at your Toyota dealer. Otherwise an accident may occur. A wheel of a different size or type may adversely affect handling, wheel and bear- ing life, brake cooling, speedometer/odom-...
When balancing your wheels, use only Toyota balance weights or equivalent and a plastic or rubber hammer. As with any wheel, periodically check your aluminum wheels for damage. If damaged, replace immediately.
Page 430
SECTION – DO−IT−YOURSELF MAINTENANCE Electrical components Checking 12 volt battery condition ......12 volt battery recharging precautionss .
Checking 12 volt battery condition— —Checking 12 volt battery —Precautions exterior CAUTION EMERGENCY MEASURES If electrolyte gets in your eyes, 12 VOLT BATTERY PRECAUTIONS flush your eyes with clean water and get immediate medical atten- When the 12 volt battery must be re- placed, use the Prius designated bat- tion.
Page 432
After you reconnect the 12 volt battery, Hold−down clamp Ground cable NOTICE shift the shift lever to “N” and confirm the shift position is “N” when the “IG−ON” z Be sure the hybrid system and all mode is enabled. accessories are off before perform- ing maintenance.
12 volt battery recharging Checking and replacing fuses precautions During recharging, the battery is pro- NOTICE ducing hydrogen gas. Type A Never recharge the battery with the Therefore, before recharging: hybrid system on. Also, be sure all 1. If recharging with the battery installed accessories are turned off.
Page 434
The location of the pull−out there is a problem with the electrical sys- tool is shown in the illustration. tem. Have your Toyota dealer correct it as soon as possible. If you are not sure whether the fuse has...
This consist of a number of LEDs. If any of and could result in serious injury product is available at your Toyota dealer LEDs burn out, take your vehicle to your or death by electric shock.
Page 436
Front turn signal inside of the lense, or if there is water — lights pooled inside light, contact your Toyota dealer. Rear turn signal lights — Tail lights — Stop lights — High mounted stop- — light Back−up lights...
Page 437
—Headlights 83p030a 83p031 83p010a Removing clip 1. Open the hood. Remove the clips 2. RIGHT−HAND HEADLIGHT ONLY: Re- and take out the cover. move the clip and take out the air cleaner inlet. Remove and install the clips as shown in the following illustrations.
83p011 83p013a 83p014a Removing clip 3. Unplug the connector. Turn the bulb 4. Release the bulb retaining spring cover counter−clockwise and remove and remove the bulb along with the socket. Install a new bulb into the socket and return the bulb retaining If the connector is tight, wiggle it.
Page 439
—Front fog lights —Parking lights If either the left or right front fog lights burns out, contact your Toyota dealer. NOTICE Do not try to replace the front fog 83p015b 83p016a light bulbs by yourself. You may dam- age the vehicle.
Page 440
—Rear turn signal, tail and —Front turn signal lights back−up lights 83p018a 83p023a 83p025c a: Rear turn signal light b: Back−up light c: Tail light 83p019b 83p024b...
Dimensions and weight Engine Electric motor Overall length mm (in.) 4445 (175.0) Type: Permanent magnet synchronous Model: 1.5 L 4−cylinder (1NZ−FXE) motor (water cooling) Overall width mm (in.) 1725 (67.9) Type: 4−cylinder in line, 4 cycle, gasoline Maximum output: Overall height mm (in.) 1490 (58.7)*...
Fuel Hybrid battery Service specifications Fuel type: Type: Nickel−Metal hydride battery ENGINE Unleaded gasoline, Octane Rating 87 Voltage: 7.2 V Valve clearance (engine cold), mm (in.): (Research Octane Number 91) or Intake 0.17 − 0.23 (0.007 − 0.009) Capacity: 6.5 Ah (3HR) higher Exhaust 0.27 −...
Page 445
Without filter 3.4 (3.6, 3.0) converter 2.7 (2.9, 2.4) “Toyota Genuine Motor Oil” is used in your Coolant type: Toyota vehicle. Use Toyota approved “Toyota “Toyota Super Long Life Coolant” is Genuine Motor Oil” or equivalent to satisfy the...
Wheel free play: Standard 15 x 6JJ “Toyota Genuine ATF WS” or Less than 30 mm (1.2 in.) equivalent Spare 16 x 4T Please contact your Toyota dealer for further Wheel torque, N·m (kgf·m, details. ft·lbf): 103 (10.5, 76) NOTE: For a complete information on tires (e.g.
Fuses 90p007b 90p005b 90p008b Instrument panel Engine compartment Luggage compartment 1. PWR 30 A: Power windows 8. GAUGE 10 A: Gauge and meter, back− 15. TAIL 10 A: Tail lights, license plates up lights, emergency flasher, power light, parking lights 2.
Page 448
22. IGN 7.5 A: Hybrid system, hybrid ve- 35. ABS−1 25 A: Anti−lock brake system hicle immobilizer system, SRS airbags 36. ETCS 10 A: Electronic throttle control 23. SPARE 30 A: Spare system 24. SPARE 15 A: Spare 37. BATT FAN 10 A: Battery cooling fan 25.
Page 450
SECTION REPORTING SAFETY DEFECTS FOR U.S. OWNERS Reporting safety defects for U.S. owners ..... .
Page 451
However, NHTSA cannot become involved in individual prob- lems between you, your dealer, or Toyota Motor Sales, U.S.A., Inc.
Page 452
Information Guide How to operate PUSH BUTTON STARTING HYBRID SYSTEM A. Starting HYBRID SYSTEM Apply the parking brake firmly. Insert the key* and press the “POWER” switch with the brake pedal depressed firmly. You can start driving your Prius when the flashing “READY” light stays on after a few seconds and you hear two beeps.
Information Guide B. Stopping procedure Stop your Prius completely by de- pressing the brake pedal and then ap- ply the parking brake. Press the “P” position switch. The in- dicator on the switch comes on and transaxle is locked to “P”. Note: Be sure to put the hybrid transaxle into “P”...
Page 454
U −5 Quick index D If a service reminder indicator or warning buzzer comes on . . . D If your vehicle will not start ........D If your vehicle overheats .
Important information about this manual Safety and vehicle damage warnings Safety symbol Throughout this manual, you will see safety and vehicle dam- age warnings. You must follow these warnings carefully to avoid possible injury or damage. The types of warnings, what they look like, and how they are used in this manual are explained as follows: CAUTION This is a warning against anything which may...
None of these systems, either indi- Toyota encourages you and your family to take the time vidually or together, can ensure that there is no injury in to read Section 2−2 of this Owner’s Manual carefully.
Toyota recommends you to read the provisions in Sec- D Engine speed tion 2−2 carefully and refer to them as needed during D Whether the brake pedal was applied or not your time of ownership of this vehicle.
Page 458
D SRS airbag deployment data Toyota will not disclose the data recorded in an EDR to a third party except when: D SRS airbag system diagnostic data D An agreement from the vehicle’s owner (or the leas- If your vehicle is equipped with a vehicle stability con-...
Page 459
New vehicle warranty Important health and safety information about your Toyota Your new vehicle is covered by the following Toyota limited warranties: D New vehicle warranty CAUTION D Emission control systems warranty WARNING: Engine exhaust, some of its constitu- D Others ents, and a wide variety of automobile compo- For further information, please refer to the “Owner’s...
Page 460
Accessories, spare parts and Spark ignition system of your Toyota modification of your Toyota The spark ignition system in your Toyota meets all re- quirements of the Canadian Interference−Causing Equip- A wide variety of non−genuine spare parts and accesso- ment Standard.
Page 461
For details, see “Keys” on page 20 and “Smart entry sioner removed and disposed of by the qualified service and start system” on page 24 in Section 2−1. shop or by your Toyota dealer before you dispose of your vehicle. CAUTION...
Page 462
(See “Precautions for use” on page 14 in Section 1−2.) This compo- nent is provided to disable the high voltage sys- tem in case of servicing at a Toyota dealer. viii...
CAUTION If your vehicle needs to be towed, do it with the front wheels raised. For details on towing, see “If If an accident occurs your vehicle needs to be towed” on page 372 in Section 5. Pull your vehicle off the road, push the “P” posi- tion switch, stop the hybrid system and if the key is inserted into key slot, remove it.
Page 464
CAUTION High Voltage Your vehicle is equipped with cables connected to parts of the vehicle subject to high voltage (about 500 V at maximum). There are some other parts that reach high temperatures while drive. Never touch battery cables (wrapped in orange−colored har- nesses) or their connectors since they are under high voltage and dangerous.
Need help?
Do you have a question about the 2006 Prius and is the answer not in the manual?
Questions and answers