Table of Contents
Advertisement
2.4 Finished operation
WARNING
WARNING
DANGER
2.5 Inspection and maintenance
CAUTION
WARNING
WARNING
3. Technical data
3.1 Operation condition and environment
Temperature operating range:
Relative humidity:
electric winch is not suitable to use in fire, explosion risk or corrosive gas environments , also
It cannot be used for lifting melted steel, poisonous, inflammable and explosive goods
After operation, please make sure the weight is completely resting on a flat
service to avoid the load from dropping.
When the operation finished, cut off the control pendant in order to avoid
wrong operations by others.
Emergency procedure: In the event of a blocked steel wire or any other
malfunction of
maneuverer without attempting any further actions. Immediately set up a
safety perimeter around the winch and the load to prevent access by any
unauthorized persons. Call in the necessary personnel to remove the load
and intervene on the winch.
Professionals must inspect and maintain the
otherwise, please contact your dealer to inspect and service the winch.
The wire rope cannot be repaired, it must be replaced when damage or
wear is severe.
It is forbidden to use the
obvious signs of damage. Also during maintenance it may not be used.
Also do not use wire rope which is damaged.
-10°C ~ +40°C
<85%, this product is not designed for underwater use.
electric pulling winch, immediately stop the
winch, which has any problems or
winch regularly
6
Advertisement
Table of Contents
