Advertisement
In Use:
The GigRig Three2One guitar selector features three inputs. You can
now switch easily between 1-3 guitars or even line level inputs such as
a keyboards or drum machines!
After plugging your instruments in simply use the footswitch to cycle
through them. Need more inputs? You can link 2 units together for up
to 6 guitars.
If you need to balance levels between differing instruments, then
simply select the adjacent preamp button. This engages the pre-amp
gain controls next to the LED displays. You can then easily cut or boost
the individual inputs.
About the GigRig Custom designed pre-amp:
It's awesome! We've doubled the voltage internally from 9v to 18v, so
the Three2One has massive input headroom and can easily cope with a
huge range of differing guitar pickup types (including active pickups),
but remains ultra clean and quiet.
However, without the preamp selected, the guitar is true bypass; your
guitar signal passes straight through. With the preamp selected
(button pressed in) you can use the corresponding gain control to set
your guitar's level, cut/ boost or simply set it to unity gain that will also
give you a buffer, which helps keep your signal clean and strong over
long cable runs.
About the Optokick Footswitch
The Three2one uses the exclusively TheGigRig designed Optokick
footswitch. It's milled from incredibly tough marine quality stainless
steel. The Optokick footswitch uses light instead of potentially un-
GigRig Ltd,
© The
2016. Business Reg: 05731704 / VAT: 884568858. All
rights reserved. Design rights claimed. Moral rights asserted.
Advertisement
