Advertisement
reliable mechanical switching. We firmly believe it's the most reliable
footswitch in the world!
In Use:
Using inputs one and two first; the Three2one will ignore the third
input and will only switch between the two guitars in inputs in use.
(Blue
and Green). When input three is also used, then Three2one will
then automatically sense a third input being connected and will cycle
through all 3 inputs.
Option: More than three Guitars? Use two Three2one units!
Connect two units together with a ¼" TRS (stereo) cable to connect up
to 6 guitars. Pressing the footswitch on one unit will mute the other
unit. You can use either units' output to connect to your pedalboard or
amplifier.
Special Functions:
Tip... It's best to disconnect the output before re-configuring your
Three2one, or just turn down your amplifier if you prefer. To enter the
Special Functions menu simply hold down the footswitch when
applying power to the Three2one. You will then see some of the lights
are on and others are off, this tells you the current configuration. To
change the configuration, press the footswitch once. The
Red
light will
flash five times. If you press the footswitch again whilst the light is
flashing the
Red
function will be toggled, you will see that the light will
have changed its state.
The next press will take you to the
Green
function and the next to the
Blue
function. Simply press the foot switch again whilst the light is
flashing to change the Three2One operation. (This change is stored by
your Three2one.)
Tip: Selecting the
Blue
function immediately takes you to Blend
mode*.
GigRig Ltd,
© The
2016. Business Reg: 05731704 / VAT: 884568858. All
rights reserved. Design rights claimed. Moral rights asserted.
Advertisement
