JB Systems USB PARTYSET Operation Manual page 13

ENGLISH
29 000-255
30 000-255
31 000-255
32 000-255
000-015
33
016-255
000
001-127
34
128
129-255
Extra functions in the menu
• Press the [MENU] button until the display shows [SYS].
• Press the [ENTER] button if you want to enter this part of the menu with extra options.
• Use the [UP/DOWN] buttons to browse the extra functions in this System menu
o
[LEdS] with this option you can decide if the display should be always on or if it can go off
after a while when no new information needs to be shown (only a small dot will stay on)
▪
▪
▪
o
[ ir] gives you the opportunity to activate or deactivate the remote control receiver.
▪
▪
▪
o
[SouN] When the bar is used in a sound controlled mode, you can decide here how the bar
should react when no sound or music is detected.
▪
▪
▪
o
[FAiL] gives you the opportunity to decide how the bar should react when DMX is lost or
interrupted.
▪
▪
▪
o
[rESt] can be used to reset all the settings of the bar to the original factory settings
▪
▪
▪
JB SYSTEMS®
Red
Green
Blue
White
No Strobe
Strobe Speed
Stop
Clockwise rotation
Stop
Anticlockwise rotation
Press the [ENTER] button to enter the option settings
Use the [UP / DOWN] button to select the desired mode:
•
[on] = function activated. When no new information needs to be shown on
the display, the display will turn off. As soon as new information is available
(for example: when you use the remote control to select another mode) the
display will turn on automatically to show you this new information. After a
while, it will turn off again.
•
OFF = function deactivated. The LED display will be always lit.
Press the [ENTER] button to confirm your setting
Press the [ENTER] button to enter the option settings
Use the [UP / DOWN] button to select the desired mode:
•
ON = function activated. The wireless IR remote controller can be used.
•
OFF = function deactivated. The wireless IR remote controller can NOT be
used.
Press the [ENTER] button to confirm your setting
Press the [ENTER] button to enter the option settings
Use the [UP / DOWN] button to select the desired mode:
•
[LASt] = when no sound is detected, the effects will continue to execute the
last active show
•
[oFF] = when no sound is detected, the bar will go in Blackout mode. (the
light output will be shut down)
Press the [ENTER] button to confirm your setting
Press the [ENTER] button to enter the option settings
Use the [UP / DOWN] button to select the desired mode:
•
[hoLd] = The last active setting will be kept till a new signal comes in.
•
[bLAC] = The bar and effects will go in Blackout mode.(light shut off)
Press the [ENTER] button to confirm your setting
Press the [ENTER] button to enter the option settings
Use the [UP / DOWN] button to select the desired mode:
•
[YES] = do the factory reset. (firmware version will appear after pressing
enter)
•
[ no] = don't do the factory reset and return to the menu.
Press the [ENTER] button to confirm your choice
Motor Rotation (slow to fast)
11/12
USER MANUAL
0% → 100%
Slow to Fast
USB PARTYSET