HP 9000 Manual page 90

(324) WARNING: Status reply received <number_of_characters> characters
CAUSE: A status reply of more than one character was received in the data
from the device on the remote terminal server.
ACTION: No action is necessary.
(325) WARNING: Unable to send interrupt signal to application:
CAUSE: An interrupt could not be sent to the application due to the system error given.
ACTION: Look up what the ioctl(2) man page states about the system error
given and make the correction as appropriate.
(326) WARNING: Unable to send break to application:
CAUSE: A break could not be sent to the application due to the system error given.
ACTION: Look up what the ioctl(2) man page states about the system error
given and make the correction as appropriate.
(327) WARNING: Unable to write <number_of_bytes> bytes to pty
CAUSE: An attempt to write all data to the pty failed because the pty had
no room for the amount of data specified.
ACTION: Determine if the application is running correctly and draining data
from the pty regularly and restart the application if it is not.
(328) WARNING: Unable to write <number_of_bytes> bytes of normal data to network
CAUSE: An attempt to write all data to the network failed because the network
had no room for the amount of data specified.
ACTION: Determine if the network, terminal server, and device are running correctly
and draining data regularly and correct the situation as necessary.
B-24 Appendix B: ocd Logging Messages
system error <system_error>: <system_message>
system error <system_error>: <system_message>