HP 9000 Manual page 75

(207) ERROR: No timing mark negotiation to obtain from network within time interval allowed
CAUSE: There was no data and thus no timing mark negotiation to receive from
the network during the time to wait for such negotiations (most likely
because of the load on the terminal server, network, or system).
NOTE: This message is followed by message (298).
ACTION: Determine if the terminal server and device are operational and enable
the printer if they are.
(208) ERROR: No timing mark negotiation received in data during time interval allowed
CAUSE: There was no timing mark negotiation in the data received from the remote terminal server.
NOTE: This message is followed by message (298).
ACTION: Enable the printer.
(209) ERROR: Unable to obtain status reply from device:
system error <system_error>: <system_message>
CAUSE: There was no status reply to receive from the network due to the system error given.
NOTE: This message is followed by messages (296), (297), (298), and (299).
ACTION: Determine if the terminal server and device are operational and enable
the printer or restart the application if they are.
(210) ERROR: No status reply to obtain from device within time interval allowed
CAUSE: There was no data and thus no status reply to receive from the network
during the time to wait for that status reply (most likely because of
the load on the terminal server, network, or system).
NOTE: This message is followed by messages (296), (297), (298), and (299).
ACTION: Determine if the terminal server and device are operational and enable
the printer or restart the application if they are.
(211) ERROR: Printer busy
CAUSE: The printer on the remote terminal server was busy with another request.
ACTION: Wait for the printer to free up before sending the next printer request.
(212) ERROR: Printer out of paper
CAUSE: The printer on the remote terminal server was out of paper.
Appendix B: ocd Logging Messages B-9