HP 9000 Manual page 78

MESSAGES COMMONLY SEEN WITH NON-STANDARD (USER-WRITTEN) APPLICATIONS:
(222) ERROR: Control device request rejected as connection not open
CAUSE: A control device request was received before an open request was
NOTE: This message is followed by messages (296) and (297).
ACTION: Have all control device requests for a pseudonym sandwiched between an
(223) ERROR: Unable to obtain control device request argument:
CAUSE: The parameters to set for a set parameters control device request
ACTION: Determine if the correct structure (termio) is used and the correct
(224) ERROR: Unable to toggle binary mode off
CAUSE: The binary mode was not turned off successfully.
NOTE: This message is followed by message (296), (297), and (299).
ACTION: Determine if the terminal server and device are operational and whether
(225) ERROR: Unable to toggle binary mode on
CAUSE: The binary mode was not turned on successfully.
NOTE: This message is followed by message (296), (297), and (299).
ACTION: Determine if the terminal server and device are operational and whether
B-12 Appendix B: ocd Logging Messages
received and after a close request was received.
open request for that pseudonym and a close request for that pseudonym.
system error <system_error>: <system_message>
could not be obtained due to the system error given.
parameters are being set and make any changes necessary.
binary mode can be toggled off for the terminal server and
restart the application if all conditions are met.
binary mode can be toggled off for the terminal server and
restart the application if all conditions are met.