HP 9000 Manual page 74

(203) ERROR: Connection failed
CAUSE: A connection to the remote terminal server was not made.
NOTE: This message is followed by messages (296), (297), and (298).
ACTION: Determine if the terminal server and device are operational and enable
the printer or restart the application if they are.
(204) ERROR: Invalid terminating status request received
CAUSE: The final status request to the device on the remote terminal server failed.
NOTE: This message is followed by message (296), (297), and (299).
ACTION: Determine if the terminal server and device are operational and restart
the application if they are.
(205) ERROR: Give up trying to obtain connection as number of open connection tries
has been exhausted
CAUSE: The number of tries to open a connection to the device on the remote
terminal server was exhausted.
NOTE: This message is followed by messages (296), (297), and (298).
ACTION: Determine if the terminal server and device are operational and enable
the printer or restart the application if they are.
(206) ERROR: Unable to obtain timing mark negotiation from network:
system error <system_error>: <system_message>
CAUSE: There was no timing mark negotiation to receive from the network due to
the system error given.
NOTE: This message is followed by message (298).
ACTION: Determine if the terminal server and device are operational and enable the printer if they are.
B-8 Appendix B: ocd Logging Messages