CCV InSync System Manual page 25

Buffer battery
Dimensions
Weight
Remarks about the lithium battery
To secure data and the clock function and for the safety circuit, the terminals are equipped with a lithium battery.
This battery cannot be replaced without opening the housing. The service life of the battery is approx. 8 years, when
the device is supplied with mains voltage in around 50% of this period. The ambient conditions for storage and
operation as described in this system manual must be observed for this purpose. Only the manufacturer CCV
Deutschland GmbH may replace the battery.
Please observe that lithium batteries must not be discarded with general waste but disposed of properly.
Make sure that lithium batteries are not damaged. Under certain circumstances, they can react strongly with water
or air.
Calculation example for the battery life:
Total capacity
Consumption self-drain (10 years at -40°C ... +30°C):
Consumption storage period: 2 years
Option 1: Consumption operation with 0% external supply: 4 years
Option 2: Consumption operation with 50% external supply: 8 years
Option 3: Consumption operation with 62.5% external supply: 10 years
Minimum reserve
CCV InSync System Manual Rev.03 04/2019 PA91P003 |
Note: The main adapter available for testing purposes (starter kit) is only
suitable for testing purposes in the laboratory and must not be used in
production.
Integrated lithium ion battery for buffering SRAM and clock. Service life: up to 8
years when stored at around 25°C and voltage supply in at least 50 % of that
time.
Front panel: 84 x 105 x 24.3 mm ± 0.1 mm
Interior: 53 x 73 x 78 mm ± 0.1 mm
EVA cut-out: 61 x 73 mm ± 0.2 mm
310g ± 5%
Page 25
1000 mAh
100 mAh
262 mAh
524 mAh
524 mAh
524 mAh
114 mAh