Develop ineo 5000i Quick Manual page 11

Error Message
No Paper Fed T1
No Paper Fed T2
No Paper Fed T3
No Paper Fed T4
No Paper MP
No Paper T1
No Paper T2
No Paper T3
No Paper T4
No Toner
Output Tray Full
Replace Toner
Supplies
Drum End Soon
Supplies
Replace Drum
Cause
The machine failed to feed
paper from the indicated
paper tray.
The MP tray is out of paper,
or paper is not loaded
correctly in the MP tray.
The machine failed to feed
paper from the indicated
paper tray.
The toner cartridge or the
toner cartridge and imaging
unit assembly is not
installed correctly.
The output paper tray is full. Remove printed paper from output
The toner cartridge is at the
end of its life. The machine
stops all print operations.
The imaging unit is near the
end of its life.
It is time to replace the
imaging unit.
The imaging unit counter
was not reset when a new
imaging unit was installed.
Action
Pull out the paper tray indicated on
the LCD and remove all jammed
paper.
Do one of the following:
• Refill paper in the MP tray. Make
sure the paper guides are set to
the correct size.
• If paper is in the tray, remove it and
load it again. Make sure the paper
guides are set to the correct size.
Do one of the following:
• Refill paper in the paper tray
indicated on the LCD. Make sure
the paper guides are set to the
correct size.
• If paper is in the tray, remove it and
load it again. Make sure the paper
guides are set to the correct size.
Remove the toner cartridge and
imaging unit assembly. Remove the
toner cartridge from the imaging unit,
and reinstall the toner cartridge back
in the imaging unit. Reinstall the toner
cartridge and imaging unit assembly
back in the machine. If the problem
continues, replace the toner cartridge
with a new one.
tray indicated on the LCD.
Replace the toner cartridge with a
new one.
Order a new imaging unit before the
LCD displays Replace Drum.
Replace the imaging unit with a new
one.
Reset the imaging unit counter.
See the instructions included with the
new imaging unit.
10