Silvercrest SPBW 3000 A1 Operating Instructions Manual page 41

♦ If charging does not start automatically, press the
ON/OFF button
process.
NOTE
► Alternatively, you can also use the original
charging cable (USB cable) provided by the
respective device manufacturer.
♦ During the charging process, the current charge
level of the Power Bank is shown via the charge
level LEDs
Charging the Power Bank).
♦ To end the charging procedure, disconnect the
charging cable
the Power Bank. The charging status LEDs
off after about 30 seconds.
│
■ 38
(see table in chapter entitled
from the mobile device and
GB │ IE
briefly to start the charging
SPBW 3000 A1
go