Inserting/Changing The Battery - Unify OpenStage SL4 professional User Manual

16

Inserting/changing the battery

The handset is supplied with an approved battery. The battery is not charged when supplied. It is
first charged in the handset.
1. If installed: Remove the attachment clip
Insert a screwdriver between the attachment clip and the battery cover (1) and force the attach-
ment clip outward (2) until it dislodges.
Likewise dislodge the clip on the opposite side and then remove it.
2. Open the battery compartment
Reach into the cavity on the housing and lift up the battery cover.
Caution:
• Please observe the safety notes
• Only use approved batteries
• Open the battery compartment in a dust-free environment only.
• Your phonebook entries and all settings remain stored even if you remove the battery. The
date and time settings will be reset.
• Only remove the battery if it is defective. The battery's life diminishes each time it is re-
moved.
1
2
Putting the handset into service
Page 4.

Page 109!
