Plugging In And Ironing; Steam Ironing; Ironing With Steam Blast; Temporarily Setting The Steam Iron Aside - Silvercrest SDBK 2200 C3 Operating Instructions Manual

Plugging in and ironing

Dry ironing without steam is possible at all tempera-
tures, steam ironing is only possible within the tem-
perature range •••
perature regulator 7.
• Insert the plug into a power socket.
Attention!
Should the clothing care instructions forbid ironing,
(Symbol ), the clothing item may not be ironed.
If you do so, the clothing item could be permanently
damaged.
• Check the care instructions on the labels in the
garment to see if it is suitable for being ironed,
and at which temperature setting.
Symbol
Symbol
Temperature
Care instruction
regulator 7
••
•••
• Select the best suitable temperature setting with
the temperature controller 7.
The control lamp for the temperature 6 glows.
When the set temperature has been reached, the
temperature control lamp 6 goes out.
(marked black) on the tem-
Type of material
Synthetic
•
fibres
Silk, wool
Cotton,
linen
MAX
• Wait until the temperature control lamp 6
extinguishes.
• To moisten the laundry, press the spray button
This function is suitable for very dry and very crumpled
garments.

Steam ironing

• Programme the steam regulator 3 to the desired
steam setting.
• The temperature regulator 7 must be turned into
at least the adjustment range •••
it cannot produce any steam.

Ironing with steam blast

The steam blast is especially suitable for smoothing
difficult to reach parts of a garment.
• Slightly raise the steam iron.
• For a steam blast, press the steam blast
button 5.
Temporarily setting the steam
iron aside
Risk of fire!
NEVER leave the hot, mains-connected or switched-
on steam iron unattended.
• Place the temperature regulator 7 into the
position "MIN".
• Place the steam iron only on the cable base 8
or insert it onto the station q.
- 27 -
4.
. Otherwise