Select Data Pattern; Enter Test Timeout; Figure 26. Select Data Pattern; Figure 27. Bert Test Functions - Selection 4, Enter Test Time Out - ADTRAN HDSL4 Installation And Maintenance Manual

Control Port Operation

Select Data Pattern

The Select Data Pattern option from the BERT Test Screen allows the appropriate data test
pattern for the desired results to be selected.
of test patterns.
Shelf: 1
Unacknowledged Alarms:

Enter Test Timeout

The Enter Test Timeout option displays the Timeout Screen
for a specific duration by entering the hours and/or minutes, or can run indefinitely by
entering 00:00, per the note on the screen.
Shelf: 1
Unacknowledged Alarms:

Figure 27. BERT Test Functions - Selection 4, Enter Test Time Out

34
Slot: 18 Total Access System
MAJOR
Circuit ID:
CUSTOMER Pattern Screen
Current Pattern = QRSS Pattern
--------------------------------------
1. 63 Pattern
2. 511 Pattern
3. 2047 Pattern
4. REV. 2047 Pattern
5. 2^15 Pattern
6. 2^20 Pattern
7. QRSS Pattern
8. 2^23 Pattern
Selection:

Figure 26. Select Data Pattern

Slot: 18 Total Access System
MAJOR
Circuit ID:
CUSTOMER Timeout Screen
Test Timeout(Hr:Min) = 02:00
----------------------------
1. Change Timeout
*NOTE: When timeout is set to 00:00, the
test will run indefinitely.
Selection:
HDSL4 for General Distribution Installation and Maintenance Practice
Figure 26 illustrates this screen with the menu
INFO
(Figure
INFO
03/09/05 10:59
27). The timeout can run
03/09/05 10:59
61223HDSL4L2-5C