Advertisement
Loader Arm Calibration
Screen
To access this screen, push button 2 on the
Calibration Screen (page
This screen allows the user to set the loader arm to
the In position (fully inward toward the machine), or to
the Home position (fully out away from the machine).
The clamp/release point is set to where the grippers
grab and release the pipe from the cam.
Push the following buttons set the loader arm to the
In, Home, or Clamp/Release position:
•
Button 1—Set arm In
•
Button 2—Set arm Home
•
(Software versions K and up only) Button
3—Clamp/Release
Figure 19
Loader-arm-calibration Screen
1. Set arm In
2. Set arm Home
Loader
8).
(Figure
19)
(Figure
19)
(Figure
19)
3. Clamp / Release
4. Return to the previous
screen
Clear Service Reminder
Screen
To access this screen, push button 7 on the
Selection Screen (page
To clear a service reminder, enter the 8-digit PIN
(13236573) into this screen
After entering the 8-digit PIN, the maintenance
reminder has been cleared.
Air Cleaner Indicator
Screen
This icon displays when the air-cleaner filter needs
servicing. Refer to the machine Operator's Manual on
servicing the air-cleaner filters.
Note:
The horn option (button 7) is only for software
versions K and up.
g029910
1. Restricted air-cleaner indicator
9
5).
(Figure
20):
Figure 20
Enter-PIN Screen
Figure 21
Main
g223615
g223614
Advertisement
