Advertisement
Horsepower Control Screen
To access this screen, push button 4 on the
Operating Screen (page
The horsepower control sets the maximum engine
load to prevent stalling under heavy loads regardless
of engine RPM.
The horsepower control allows the user to change the
speed setting that the engine can droop to before the
horsepower control system can activate.
Note:
For example, at the 60% engine-speed (rpm)
setting, the engine can stall under heavy loads.
After pushing button 4 at access the horsepower
control
(Figure
1), select one of the following options:
•
Button 1 to activate 60% engine speed (rpm) as
shown in
Figure
6.
•
Button 2 to activate 75% engine speed (rpm) as
shown in
Figure
6.
•
Button 3 to activate 90% engine speed (rpm) as
shown in
Figure
6.
•
Button 4 to return to the main-operating screen
(Figure
6).
Note:
The horn option (button 7) is only for
software versions K and up.
Horsepower-control Screen
1. 60% engine speed (rpm)
2. 75% engine speed (rpm)
Main
1).
Figure 6
3. 90% engine speed (rpm)
4. Return to the previous
screen
Pipe Row Selector Screen
This screen allows you to select the row of pipe(s)
that you want to use.
To access this screen, push button 8 on the
Operating Screen (page
To select your pipe row, perform the following:
1.
Push the right or left arrow to select the row
number to the row you want to access
1. Row selector indicator
2. Row number
3. Hide the side window
2.
After placing the arrow beneath the row number
you want to access, push the 8 button
to hide the side window.
g029901
4
1).
Figure 7
Pipe-row-selector Screen
4. Right arrow
5. Left arrow
Main
(Figure
7).
g029902
(Figure
7)
Advertisement
