Advertisement
Main Selection Screen
To access this screen, push the down arrow on the
Main Drill Functions Displayed in Torque Screen
(page
2).
This screen allows the user to choose from the
following options:
•
Button 1—
Machine Information Screen (page 6)
as shown in
Figure 10
•
Button 2—Lubrication and maintenance chart
(Figure
11)
•
Button 3—Read error codes
•
Button 4—Return to the previous screen.
•
Button 5—Diagnose and adjust parameters
(Figure
8)
•
Button 6—Adjust the loader calibration
•
Button 7—Clear a service reminder
•
Button 8—Air-hammer control
•
OK button—Return to the
(page 5)
as shown in
Main-selection Screen
1. Machine information
2. Lubrication and
maintenance chart
3. Loader calibration
4. Diagnose and adjust
parameters
5. Air-hammer control
(Figure
16)
(Figure
(Figure
(Figure
8)
Control Select Screen
Figure 8
Figure 8
6. Clear service reminder
7. Control/joystick selection
8. Error codes
9. Return to the Main
Operating Screen
Control Select Screen
To access this screen, push the OK button from the
Main Selection Screen (page
The 2 control layouts that you can choose from consist
of the following:
•
Mode I—Places the drilling functions on the right
joystick, while the left joystick operates the pipe
loader and the wrench functions
Push button 4 to select this mode
•
Mode II—Splits the drilling, wrench, and pipe
loading between the left and right joysticks
9). The thrust controls will be on the
and the rotation controls will be on the
joystick.
Push button 8 to select this mode
8)
8)
1. Mode I
g029903
5
5).
(Figure
(Figure
(Figure
Figure 9
Control-select Screen
2. Mode II
9).
9).
(Figure
joystick
RIGHT
LEFT
9).
g025078
Advertisement
