Advertisement
Machine Information
Screen
This screen contains the following information:
•
The machine model and serial number
•
The number of engine hours for the machine
(Figure
10).
•
The number of drilling fluid-gallons used and the
number of re-settable drilling-fluid (mud) gallons
used
(Figure
10).
Note:
Push button 3 to reset the number of
drilling-fluid (mud) gallons since the last reset
10).
Figure 10
Machine-information Screen
1. Model and machine serial
number
2. Number of engine hours
3. Total number of
drilling-fluid (mud) gallons
used and re-settable
drilling-fluid (mud) gallons
used
(Figure
10).
(Figure
g029895
4. Reset drilling-fluid (mud)
gallons
5. Previous screen
Lubrication and
Maintenance Screens
To access this screen, push button 2 on the
Selection Screen (page
These screens provide the user with the daily
maintenance schedules and intervals shown below.
Note:
Push the ESC button to exit this screen.
Push the OK button and enter PIN 13236573 to reset
the maintenance schedules.
Push the following buttons to attain the subsequent
maintenance schedules:
•
Button 1—50-hours
•
Button 2—250-hours
•
Button 3—500-hours
•
Button 4—1,000-hours
Main Maintenance Screen
50-Hour Maintenance Screen
6
5).
(Figure
12)
(Figure
13)
(Figure
14)
(Figure
15)
Figure 11
Figure 12
Main
g029904
g029905
Advertisement
