Advertisement
Drill Rotation Speed Screen
To access this screen, hold the OK button on the
Operating Screen (page
This screen allows the user to increase or decrease
the rotation speed of the drill.
To change the rotation speed of the drill, perform the
following:
1.
Hold the OK button to access the
drill-rotation-speed window.
2.
Push the Left arrow to decrease the maximum
speed, or push the Right arrow to increase the
maximum speed
3.
Release the OK button to set the drill-rotation
speed
(Figure
4).
Note:
The horn option (button 7) is only for
software versions K and up.
Drill-rotation-speed Screen
1. Drill-rotation speed meter
2. Right arrow (increase
speed)
1).
(Figure
4).
Figure 4
3. OK button (sets the
drill-rotation speed)
4. Left arrow (decrease
speed)
Thrust Control Screen
Main
This screen allows the user to increase or decrease
the thrust output of the machine.
To access this screen, push button 3 on the
Operating Screen (page 1)
Functions Displayed in Pressure Screen (page
To change the thrust output of the machine, perform
the following:
1.
Push button 1 to increase the thrust output, or
button 3 to decrease the thrust output of the
machine
1. Increase the thrust output
2. Thrust-output meter
g029899
2.
After setting the thrust output, push button 4
(Figure
5), and return to the
Screen (page 1)
Displayed in Pressure Screen (page
Note:
The horn option (button 7) is only for
software versions K and up.
3
or on the
(Figure
5).
Figure 5
Thrust-control Screen
3. Decrease the thrust output
4. Return to the previous
screen
Main Operating
or
Main Drill Functions
Main
Main Drill
2).
g029900
2).
Advertisement
